Search found 164 matches
- Fri Apr 24, 2020 6:11 am
- Forum: Creative Recording
- Topic: Digitizing Analog Songs, need suggestion on small, easy no screen options
- Replies: 19
- Views: 6250
Re: Digitizing Analog Songs, need suggestion on small, easy no screen options
I've been doing a lot of transfers during the quarantine, from cassette, DAT, reel and turntable. I have been using a Behringer UMC202HD interface (under $100 IIRC). It has a mic/line option and can handle line level signals. I tried my Presonus Audiobox first. It apparently only has mic-level input...
- Tue Mar 06, 2018 7:47 am
- Forum: Creative Recording
- Topic: headphone mixer systems
- Replies: 5
- Views: 1833
Re: headphone mixer systems
I have the Behringer Powerplay. Couldn't be happier with it, though I have had one mixer go out.
- Thu Jan 25, 2018 6:09 pm
- Forum: Creative Recording
- Topic: Tascam 388 monitors
- Replies: 2
- Views: 1500
Re: Tascam 388 monitors
I've never used a 388 but have used various TASCAM mixers and recorders over the years. Looking at the manual, I would say that you would connect your monitors to the "monitor out" jacks on the back of the unit and then use the "monitor/ phones" control on the top panel to control the volume of the ...
- Mon Nov 27, 2017 4:39 pm
- Forum: Creative Recording
- Topic: Attn: Recording Teachers (of teens)
- Replies: 6
- Views: 2221
Re: Attn: Recording Teachers (of teens)
By all means limit their options in the beginning. I find that when they see a multitude of options, they think they have to use all of them all the time (to the detriment of the project). They won't like it, but limit their first mixes to maybe eight tracks with real instruments (drums, guitars, et...
- Fri Mar 31, 2017 6:09 pm
- Forum: Creative Recording
- Topic: Latest gear you've acquired.....
- Replies: 5340
- Views: 2737136
- Tue Nov 24, 2015 10:13 am
- Forum: Creative Recording
- Topic: budget nearfield monitor recommendations...opinions?
- Replies: 16
- Views: 7562
- Fri Aug 01, 2014 11:01 pm
- Forum: Creative Recording
- Topic: Wiring an Otari MX5050 MkKIII-8 to a Tascam M-512
- Replies: 12
- Views: 5063
As for the playback problem, there are four separate places the tape signal can play back, all possibly at the same time. These are the main channel in "tape' position, aux 1/2 in the 'tape' position, aux 3/4 in the 'tape' position and the monitor section in the 'tape' position. Is it possible you h...
- Mon Apr 07, 2014 8:51 pm
- Forum: Creative Recording
- Topic: Deduction on instruments
- Replies: 9
- Views: 3816
- Tue Apr 01, 2014 8:33 am
- Forum: Creative Recording
- Topic: Wiring an Otari MX5050 MkKIII-8 to a Tascam M-512
- Replies: 12
- Views: 5063
I used a 520 for a while. Are there RCA ins on the OTARI? If so, go RCA out from the 512 to the recorder, but use as short of a cable as possible (under 20 foot). If only XLR, the best way to get from the board to the recorder would be to use the balanced outs. There are 8 balance amps available on ...
- Tue Feb 11, 2014 2:13 pm
- Forum: Creative Recording
- Topic: Heavy duty mic stand fix?
- Replies: 8
- Views: 3443
Just was looking at the pic again. Could it be that the two 'tabs' that the lever is attached to have bent outward a bit so the lever is not making good contact? Maybe take the pressure off the lever and then a couple of raps with a hammer on the tabs may bend them down a bit, making better contact?
- Wed Feb 05, 2014 12:18 pm
- Forum: Creative Recording
- Topic: Heavy duty mic stand fix?
- Replies: 8
- Views: 3443
- Tue Feb 04, 2014 12:03 pm
- Forum: Creative Recording
- Topic: Cat5 cables for Furman HDS-6
- Replies: 5
- Views: 2475
I've never had one break that wasn't at the end, luckily. I invested $10 or so on Ebay for a cat 5 tester and crimping tool and just keep replacing ends as they break. Pretty easy once you've done a couple. One thing I have found is the "boot" covers I used during repairs appear to keep the RJ45s fr...
- Wed Jan 22, 2014 10:24 am
- Forum: Creative Recording
- Topic: Sonar X2/Avid Artist crash
- Replies: 4
- Views: 2148
- Sat Nov 23, 2013 6:35 am
- Forum: Creative Recording
- Topic: Sonar X2/Avid Artist crash
- Replies: 4
- Views: 2148
- Fri Nov 22, 2013 8:05 pm
- Forum: Creative Recording
- Topic: Sonar X2/Avid Artist crash
- Replies: 4
- Views: 2148
Sonar X2/Avid Artist crash
I am trying to use Sonar X2 Studio along with Avid Artist Control and Avid Artist Mix controllers. When opening a project with the controllers enabled Sonar crashes. I discovered I can open Sonar, then disable the controllers, then open a project, then re-enable the controllers and then the project ...