We need a USB 2.0 hub. Some say that certain brands are better for passing audio, I don't know if I believe it...
Anyone have constant success with hubs?
USB Hub reccomendations
- DeafinONEear
- steve albini likes it
- Posts: 373
- Joined: Fri May 02, 2003 12:24 pm
- Location: San Francisco
Re: USB Hub reccomendations
i'm using a dr. bott 3 X 1 hub for 2 dongles and a midi interface and it's never had a problem. not sure about using it for audio, email them and ask.. they make good stuff.
-
- ghost haunting audio students
- Posts: 3307
- Joined: Wed May 07, 2003 2:11 pm
- Location: I have arrived... but where the hell am I?
Re: USB Hub reccomendations
I just got two APC USB2.0 hubs, not sure of the model number, but they are 4x1 powered. They seem to work just fine except that the Digidesign MIDI interface draws too much power and they shut off that port. The Digi I/O powers fine off of the Macintosh G4. So if you are running something that draws close to the 500 mA limit than don't choose APC. Otherwise it is a pretty straight forward little box. It runs everything else fine, even the daisy chained Gefen extender that then runs a keyboard and two yamaha consoles.
-Jeremy
-Jeremy
Who is online
Users browsing this forum: No registered users and 5 guests