ADM SCHEMATICS
-
- audio school graduate
- Posts: 23
- Joined: Tue Feb 14, 2006 8:26 am
- Location: Nashville
- Contact:
ADM SCHEMATICS
I have an ADM 780 mic pre that i need to rack up. Does anyone have a schematic and/or the pin-out for this unit. I have found some bits and pieces of info for this unit but i would love to have some solid drawings or an accurate pin-out. Thanks
If you need additional resources, you might also try contacting Brian Roth, who seems to have done a good few projects with ADM modules: http://www.brianroth.com/
Cheers,
-dave
Cheers,
-dave
-
- audio school graduate
- Posts: 23
- Joined: Tue Feb 14, 2006 8:26 am
- Location: Nashville
- Contact:
Hi Jean- Marc, i've posted the schematics i have on sendspace for everyone to access.
There's a pinout & schematic. About 5Mb in total.
http://www.sendspace.com/file/bl2ghw
http://www.sendspace.com/file/fkid3n
http://www.sendspace.com/file/jzyv4r
There's a pinout & schematic. About 5Mb in total.
http://www.sendspace.com/file/bl2ghw
http://www.sendspace.com/file/fkid3n
http://www.sendspace.com/file/jzyv4r
Last edited by tactics on Sun May 16, 2010 4:19 am, edited 1 time in total.
cleantone wrote:What is this case like? I've been thinking about getting one.Microphone Case, Black, Plastic N/A $30.00
Who is online
Users browsing this forum: No registered users and 183 guests