Presonus 24-4-2 Studio-Live Digital mixing desk
Presonus 24-4-2 Studio-Live Digital mixing desk
I was just wondering if anyone has used this new digital board & the Presonus recording software either in the studio or live situations & what are your thought's on it.
Dave Huffman
Dave Huffman
Will Drum For Money
I have found Sweetwater has about the best deal on this board. The price of $3299.00 is standard but they offer free shipping & if you ask you can get the recording software up graded for free or cheap. They have always treated me well & I have found the staff knows the products.
Dave Huffman
Dave Huffman
Will Drum For Money
-
- gimme a little kick & snare
- Posts: 77
- Joined: Mon May 12, 2003 4:16 pm
- Location: western,ma
- Contact:
Awesome
I've been working in the studio with the 16.4.2 for a couple years. Upgraded from a tascam 388 ( which I worked on for 10 years ).
The studiolive is amazing. Clean and honest preamps. Workflow and layout is super intuitive. EQs and compressors are useful on a lot more sources than I expected. Even the gate/expander on the 16.4.2 are great, I know the 24 has an expanded gate section, which looks pretty awesome.
I dig saving money on lack of flying faders, it's nice to have your hands back on the faders. Panning can only be done one track at a time unless you automate in the box. Overall it's a real fun machine that does what it says. Great sound, solid build, a few short comings, but nothing major. Support is solid, presonus is all about this line.
Over and out.
The studiolive is amazing. Clean and honest preamps. Workflow and layout is super intuitive. EQs and compressors are useful on a lot more sources than I expected. Even the gate/expander on the 16.4.2 are great, I know the 24 has an expanded gate section, which looks pretty awesome.
I dig saving money on lack of flying faders, it's nice to have your hands back on the faders. Panning can only be done one track at a time unless you automate in the box. Overall it's a real fun machine that does what it says. Great sound, solid build, a few short comings, but nothing major. Support is solid, presonus is all about this line.
Over and out.
Seems with CAPTURE one can record more than 16 channels -- if so > how do mix with the faders ? Just the second/third/etc. 16 tracks are just switched in the software > like most controllers ??
Thinking of moving over from the Roland VS -- which has 48 channels at mixdown...
I'm sure the Live 24 will be showing up used ,,, in a few months .
Thinking of moving over from the Roland VS -- which has 48 channels at mixdown...
I'm sure the Live 24 will be showing up used ,,, in a few months .
whatever happened to ~ just push record......
-
- gimme a little kick & snare
- Posts: 77
- Joined: Mon May 12, 2003 4:16 pm
- Location: western,ma
- Contact:
No
It doesn't bank over. It's not really a controller, it acts more like an analog mixer. You can record as many tracks as you'd like. I think I can record up to 20 tracks at once with the 16.4.2.
Stem mixes are the answer for returning more channels than are available on your board. Just configure them in your software ( I use logic ).
The whole experience is a nice combo of hardware/software, in the box and out.
Stem mixes are the answer for returning more channels than are available on your board. Just configure them in your software ( I use logic ).
The whole experience is a nice combo of hardware/software, in the box and out.
I've used the 16.4.2 quite a bit with a band that I was doing live sound for last year. Overall, I thought that the board was pretty intuitive and had a lot of features. It allowed them to run without any outboard comps and effects and did a nice job as well. I have not used it as a recording interface however. I do own a few Presonus interfaces that I use and work well.
Mark - Listen, turn knob, repeat as necessary...
-
- suffering 'studio suck'
- Posts: 464
- Joined: Tue Mar 13, 2007 6:50 pm
- Location: Central VA
- Contact:
I've used the Studiolive, both 16- and 24-channel versions, in live scenarios quite a few times, and I really really dig it for that: it sounds great, and it's super-easy and intuitive to use - and this coming from someone who hates digital boards as a general rule. I agree with radmike's characterization of the sound &etc., and (based on my somewhat limited experience) it works very well as an interface too. Don't expect it to work as seamlessly or intuitively as a control surface, though. Not that it doesn't work at all in that respect, just that it's not as amazingly insanely good or stupidly easy and intuitive with that as it is everything else.
"I don't need time, I need a deadline." -Duke Ellington
"I liked the holes in it as much as I liked what was in them." -Tom Waits
"I liked the holes in it as much as I liked what was in them." -Tom Waits
Re: No
Well, looks like we will be staying with our automated ROlAND board for awhile then . Shame the Presonus doesn't bank over --- the VS is a great magic box in that respect ~! The 2480 is fairly simple, & with enough knobs/buttons to keep one off the mouseradmike wrote:It doesn't bank over. It's not really a controller, it acts more like an analog mixer. You can record as many tracks as you'd like. I think I can record up to 20 tracks at once with the 16.4.2.
Stem mixes are the answer for returning more channels than are available on your board. Just configure them in your software ( I use logic ).
The whole experience is a nice combo of hardware/software, in the box and out.
whatever happened to ~ just push record......
- Snarl 12/8
- cryogenically thawing
- Posts: 3511
- Joined: Sat Dec 20, 2008 5:01 pm
- Location: Right Cheer
- Contact:
Remember when the RAMSA first hit the NAMM --but the Roland & Akai's included a recorder --- so we went that route.
I believe REAPER works now with the Roland board --- there is a card that connects ...since there is no USB I/O interface with the VS . Something new to learn We can probably hire someone who has that aptitude === I don't like software snags
I believe REAPER works now with the Roland board --- there is a card that connects ...since there is no USB I/O interface with the VS . Something new to learn We can probably hire someone who has that aptitude === I don't like software snags
whatever happened to ~ just push record......
Using this board ( via Lynx Aurora ) for inputs tomorrows session -- only wish they would use it for mixdown ..... but, then I don't have to engineer
Really thought the Presonus 24 was my ticket out of the Roland .... but still lacking the parameters of the VS & the cost
whatever happened to ~ just push record......
Who is online
Users browsing this forum: No registered users and 211 guests