Surrounds for JBL 4315's
Surrounds for JBL 4315's
I have a set of JBL 4315's that need to have the foam surrounds replaced on the 12" drivers. Does anyone know the best place to get good quality reasonably priced replacements? I don't necessarily need a "kit" per se, just the foam rings, but would be fine buying the kit if that's how they have to come.
- kickoldman
- alignin' 24-trk
- Posts: 54
- Joined: Sat Jun 02, 2007 7:47 am
- Location: Pittsburgh, PA
- Contact:
I've seen many nearly identical offerings on ebay.
http://cgi.ebay.com/FOAM-SURROUND-REPAI ... 230a3c77c1
I went with this seller's kit when I replaced the surrounds on my Urei 809A's. It was a little more difficult than I expected, but they turned out great and I blast them every day now.
http://cgi.ebay.com/FOAM-SURROUND-REPAI ... 230a3c77c1
I went with this seller's kit when I replaced the surrounds on my Urei 809A's. It was a little more difficult than I expected, but they turned out great and I blast them every day now.
Thanks for the link. What was difficult about the ones you did? A friend and I did the surrounds on some old Advents last week and they were pretty easy. They were flat, face mounted and the rolls on the foam were unusually inverted. We did a trick with a c-cell battery that made it easy to center them. The hardest part with those was getting the old gunk off the paper cone, which was easy once we figured out a rolling technique with a q-tip and some acetone.kickoldman wrote:I've seen many nearly identical offerings on ebay.
http://cgi.ebay.com/FOAM-SURROUND-REPAI ... 230a3c77c1
I went with this seller's kit when I replaced the surrounds on my Urei 809A's. It was a little more difficult than I expected, but they turned out great and I blast them every day now.
- kickoldman
- alignin' 24-trk
- Posts: 54
- Joined: Sat Jun 02, 2007 7:47 am
- Location: Pittsburgh, PA
- Contact:
Who is online
Users browsing this forum: No registered users and 95 guests