BX20 owners

Ed Hinton · Post by **Ed Hinton** » Sat Feb 05, 2011 4:01 pm

I have a BX20 with a bad coil. Dan Kennedy(Great River) has offered to help me get the coil cloned by a company he works with. This will cost a lot. Trying to see if there is some interest. People could buy coils from me after this is done, to offset my cost.
This would be the only supply in the world that I know of, AKG has been out for a long time.
Let me know.
Thanks,
Jeremy

Jon Nolan · Post by **Jon Nolan** » Sun Feb 06, 2011 8:22 am

hey there! might i ask what the symptoms of a bad coil are?

and, I'd be interested! i dig mine.

Ed Hinton · Post by **Ed Hinton** » Sun Feb 06, 2011 2:32 pm

Mine had bad feedback, it was making scratching noises before that happened.
Now with one side of the bad coil detached it just bit noisy, too much to use that channel.
I'm glad you might be interested, I'll let you know if I go ahead with this.
Jeremy

inasilentway · Post by **inasilentway** » Thu Feb 10, 2011 1:33 pm

You might want to try asking on the Electrical Audio forum too, Steve's love of the BX20 is well-known and many people there buy whatever he uses.

nick_a · Post by **nick_a** » Sat Feb 12, 2011 8:56 am

i'm sure my broke-ass bx20 could use a new coil or two. keep us updated. thanks.

Ed Hinton · Post by **Ed Hinton** » Sat Feb 12, 2011 9:03 am

Thanks guys.
I'll let you know when I go ahead with this.
Jeremy

Message Board

BX20 owners

BX20 owners

Who is online