Need a tech who can work on a Sony Pro Walkman WM-D6C
-
- studio intern
- Posts: 28
- Joined: Sat May 31, 2003 1:04 pm
Need a tech who can work on a Sony Pro Walkman WM-D6C
I have an old one of these that is working well I would just like to bias it for the tdk tapes that I use and not the Sony ones that are no longer made. I also am possibly interested in modifying the unit to monitor from the record head instead of the input as I am noticing a big difference in the results in playback. So calibration and EQ and some basic maintenance - any suggestions?
-
- tinnitus
- Posts: 1135
- Joined: Sat Jun 03, 2006 8:19 am
- Location: beautiful Carlsbad, CA
- Contact:
I have one too. As I recall, the bias is adjusted by soldering pads on the pcb. It's trial and mostly error.
You first need a precision casstte alignment tape to check playback response. Usually head adjustments are needed after years of use and wear. Once done, you can play with bias. You re-set it, load tape, record, play, check, rinse and repeat. Not unlike aligning a 2 head deck, twice the time and hassle from a 3 head.
You first need a precision casstte alignment tape to check playback response. Usually head adjustments are needed after years of use and wear. Once done, you can play with bias. You re-set it, load tape, record, play, check, rinse and repeat. Not unlike aligning a 2 head deck, twice the time and hassle from a 3 head.
Jim Williams
Audio Upgrades
Audio Upgrades
Who is online
Users browsing this forum: No registered users and 66 guests