if anyone has any other handy tips i'm all ears - i was also wondering would it be easy to hang an unbalanced output off the output transformer to get the good sound of iron but have the option of unbalanced?i've got a pair of PM-1000 modules that i'm going to be "racking" up (well...they are a bit too long to be racked, i'll have to build an enclosure for them since i don't really want to mutilate anything).
looking at the schematics, everything seems to be pretty straightforward and i tracked down what goes where. but i have a pair of the GA80080 600ohm/600ohm output balancing transformers from the master/monitor modules that i'd like to use for the input modules. i couldn't find a reference to the color-coding in the schematic.
do most trannys have a standard color coding for in/out/ground (i guess in & out don't really matter in a 1:1 transformer)? colors are red, brown, blue, green & black.
any insight would, of course, be greatly appreciated..."
? about Yamaha PM-1000 output trannys..
-
- gimme a little kick & snare
- Posts: 83
- Joined: Sat Feb 12, 2005 3:00 pm
- Location: florida
? about Yamaha PM-1000 output trannys..
i've posted this on The Lab board as well, but i know that guys like krash, thedug and tubejay have extensive knowledge about PM-1000 stuff so i figured this is as good a place to post...
Who is online
Users browsing this forum: No registered users and 33 guests