I am wondering whether I will need to use a D.I. before and after the stompbox. In other words is console line level to much signal for a guitar pedal.
Thanks
using giutar pedals as fx in aux sends
- doctor phd
- audio school graduate
- Posts: 16
- Joined: Tue Oct 14, 2003 8:32 pm
- Location: minneapolis
using giutar pedals as fx in aux sends
I got a doctorate in cold rockin it.
Re: using giutar pedals as fx in aux sends
I use a soundcraft delta 200 mixer, and my auxes feed guitar pedals or amps just fine.
Re: using giutar pedals as fx in aux sends
You can get away with sending a signal out from an aux send, but you should get a better sound if you match the impedance and level of the aux output to instrument level before the pedal. There is a box called a reamp that will do this for you.
After the pedal you can use a DI, but do not rule out running the pedal into a guitar amp in the next room, micing that and running that mic back into the mix . This will give you a few more creative options.
After the pedal you can use a DI, but do not rule out running the pedal into a guitar amp in the next room, micing that and running that mic back into the mix . This will give you a few more creative options.
Who is online
Users browsing this forum: No registered users and 12 guests