Royer MXL 2001 mod circuit boards
Moderators: TapeOpLarry, tomb
Royer MXL 2001 mod circuit boards
I have 14 sets for sale (power supply, mic board) for the Royer MXL 2001 mic mod. These boards were laid out by me in FreePCB then sent to the factory for fabrication. $25 per set plus $5 shipping. These are really nice boards with silkscreen layout for the parts, soldermask etc.
-
- suffering 'studio suck'
- Posts: 484
- Joined: Wed May 07, 2003 4:57 am
- Location: Visalia, CA
- Contact:
-
- ass engineer
- Posts: 42
- Joined: Thu Jan 06, 2005 6:32 pm
- Location: Urbana, IL
I PM'd as well a few hours ago. Thanks!
www.organissimo.org
organissimo - Dedicated (new CD)
"This shitty room is making your next hit record, bitch!"
organissimo - Dedicated (new CD)
"This shitty room is making your next hit record, bitch!"
-
- pushin' record
- Posts: 241
- Joined: Tue Jun 24, 2003 9:40 am
- Location: San Diego, Ca.
- Contact:
-
- suffering 'studio suck'
- Posts: 484
- Joined: Wed May 07, 2003 4:57 am
- Location: Visalia, CA
- Contact:
- shedshrine
- deaf.
- Posts: 1868
- Joined: Tue Jun 01, 2004 5:47 pm
- Location: sf bay area
-
- pushin' record
- Posts: 241
- Joined: Tue Jun 24, 2003 9:40 am
- Location: San Diego, Ca.
- Contact:
- shedshrine
- deaf.
- Posts: 1868
- Joined: Tue Jun 01, 2004 5:47 pm
- Location: sf bay area
-
- pushin' record
- Posts: 241
- Joined: Tue Jun 24, 2003 9:40 am
- Location: San Diego, Ca.
- Contact:
FWIW: The Royer mod when done really does have a U67 vibe to it! Outside of the mic the Jensen Transformer is the most expensive part. I tuned (for lack of a better term) my mic via the caps I used; the parts KIT will have this.
To be clear: You would get the PCB circuit boards from lowbujit. You could get a KIT or box of materials minus the mic and power supply box from me.
You could use anything for the PSU box - like a little military ammo case form your local Army Surplus.
It really is a rewarding to do this project!
If you want to hear some of my work:
http://www.myspace.com/sharellemusic
To be clear: You would get the PCB circuit boards from lowbujit. You could get a KIT or box of materials minus the mic and power supply box from me.
You could use anything for the PSU box - like a little military ammo case form your local Army Surplus.
It really is a rewarding to do this project!
If you want to hear some of my work:
http://www.myspace.com/sharellemusic
Who is online
Users browsing this forum: Google [Bot] and 8 guests