RegisterRegister
Log in to check your private messagesLog in to check your private messages
Log inLog in
FAQ  -  SEARCH  -  MEMBERS  -  FAVORITES  -  PROFILE
digi 001 to 002 switch

 
This forum is locked: you cannot post, reply to, or edit topics.   This topic is locked: you cannot edit posts or make replies.   printer-friendly view    Tape Op Message Board Forum Index -> 5/03-2/05: This #%^ Computer
View previous topic :: View next topic  
Author Message
otter
audio school graduate


Joined: 15 Aug 2004
Posts: 13

PostPosted: Sat Feb 12, 2005 7:07 pm    Post subject: digi 001 to 002 switch Reply with quote

should i be able to switch from digi 001 hardware to 002 hardware without downloading the 002 software? i'm finding that i can open pt without the 002 software but audio isn't coming in from my a/d converter...
yes, i know just download the new software... but that's a whole other story...
Back to top
View user's profile Send private message Send e-mail
sonikbliss
buyin' a studio


Joined: 09 Apr 2004
Posts: 920
Location: Florida

PostPosted: Sat Feb 12, 2005 7:34 pm    Post subject: Re: digi 001 to 002 switch Reply with quote

They both use the same software, ProTools LE. Digi 001 support was discontinued as of PT 6.4.

I believe you have to do the install if you are switching to a 002 because it needs to install the drivers to make your computer recognise the interface. That's why you aren't getting audio to pass through the interface.
Back to top
View user's profile Send private message
Display posts from previous:   
This forum is locked: you cannot post, reply to, or edit topics.   This topic is locked: you cannot edit posts or make replies.   printer-friendly view    Tape Op Message Board Forum Index -> 5/03-2/05: This #%^ Computer All times are GMT - 4 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum