I've got this old Grundig GDM 305 mic that has a cable attached that goes to a 7-pin connector (it looks alot like a MIDI connector actually). I think it is a 7-pin DIN connector but I'm not sure. If anybody knows how I can convert/adapt it to an XLR instead your help would be greatly appreciated.
Thanks, Jason
Grundig GDM 305 7-pin connector?
-
- buyin' a studio
- Posts: 919
- Joined: Fri Apr 09, 2004 6:49 pm
- Location: Florida
-
- buyin' a studio
- Posts: 985
- Joined: Sun Feb 15, 2004 6:27 pm
- Location: The Mome Raths Outgrabe
Re: Grundig GDM 305 7-pin connector?
There are all different kinds of din connectors, 5-pin 6 pin 11 pin etc.
Just find out what pins carry signal and what pins are ground. If you open up the mic and see where the wires connect to the pins it (should be) obvious.
Just find out what pins carry signal and what pins are ground. If you open up the mic and see where the wires connect to the pins it (should be) obvious.
"What you're saying is, unlike all the other writers, if it was really new, you'd know it was new when you heard it, and you'd love it. <b>That's a hell of an assumption</b>". -B. Marsalis
Who is online
Users browsing this forum: No registered users and 35 guests