is there a way to Punch in the dimensions of ones studio and get some idea of what will be needed for acoustics
tracking/control rooms.....
i've got a really oddball one here...and it's confounding...
what about showing a floor plan to Ethan/someone else?
thanks!
Calculations for Room?
- r0ck1r0ck2
- re-cappin' neve
- Posts: 704
- Joined: Thu Oct 09, 2003 1:55 pm
- Location: Milwaukee!!
- Contact:
- Ethan Winer
- suffering 'studio suck'
- Posts: 436
- Joined: Tue May 13, 2003 7:38 am
- Location: New Milford, CT, USA
- Contact:
Re: Calculations for Room?
> is there a way to Punch in the dimensions of ones studio and get some idea of what will be needed for acoustics tracking/control rooms. <
You can use the Mode Calculator on my company's site. Look in the Acoustics Info section. But no matter what you calculate (or even measure), the solution is always the same: As much broadband bass trapping as possible in the corners, plus absorption at the first reflection points on the side walls and ceiling. This "formula" works well for pretty much any room, regardless of the room's characteristics.
--Ethan
You can use the Mode Calculator on my company's site. Look in the Acoustics Info section. But no matter what you calculate (or even measure), the solution is always the same: As much broadband bass trapping as possible in the corners, plus absorption at the first reflection points on the side walls and ceiling. This "formula" works well for pretty much any room, regardless of the room's characteristics.
--Ethan
- r0ck1r0ck2
- re-cappin' neve
- Posts: 704
- Joined: Thu Oct 09, 2003 1:55 pm
- Location: Milwaukee!!
- Contact:
Who is online
Users browsing this forum: A.David.MacKinnon and 46 guests