Help me please...
-
- suffering 'studio suck'
- Posts: 411
- Joined: Thu Oct 28, 2004 4:34 pm
Help me please...
Is anyine tracking with the Emu 1820M I really need to know because I got a not so bad offer for it today, and would like any tape-opers opinions, Does the drivers handle well, and does anyone use it to track bands? Thanks for any help, I read the converters are the new AKM but at that price the clock must be shitty, anyways thanks
- I'm Painting Again
- zen recordist
- Posts: 7086
- Joined: Wed May 07, 2003 2:15 am
- Location: New York, New York
- Contact:
its not just the converter chips its all the stuff around them and the power you supply it too..I wish I could give you an opinion but I can't..I can give you this advice though: patience is a virtue..wait if you can to find out if it will work for you..
or buy it try it and sell it if you don't like it..
or buy it try it and sell it if you don't like it..
-
- suffering 'studio suck'
- Posts: 411
- Joined: Thu Oct 28, 2004 4:34 pm
- I'm Painting Again
- zen recordist
- Posts: 7086
- Joined: Wed May 07, 2003 2:15 am
- Location: New York, New York
- Contact:
-
- suffering 'studio suck'
- Posts: 411
- Joined: Thu Oct 28, 2004 4:34 pm
- bantam
- suffering 'studio suck'
- Posts: 480
- Joined: Sun Oct 12, 2003 3:55 pm
- Location: boston MA
- Contact:
i think he said exactly what he said. (and it was good advice)
as for the drivers, the last version produced major improvements in stability
the converters are great but the pres are terrible. i had heard that the clock was designed by an ex apogee guy but i don't know how much that means.
bottom line, you can make great recordings with this IF!!!! your source is miced correctly with a mic and pre that work well together for what you are trying to do.
as for the drivers, the last version produced major improvements in stability
the converters are great but the pres are terrible. i had heard that the clock was designed by an ex apogee guy but i don't know how much that means.
bottom line, you can make great recordings with this IF!!!! your source is miced correctly with a mic and pre that work well together for what you are trying to do.
Who is online
Users browsing this forum: No registered users and 63 guests