Yamaha PM1000 module OR Chandler Germanium?

Recording Techniques, People Skills, Gear, Recording Spaces, Computers, and DIY

Moderators: drumsound, tomb

Post Reply
User avatar
r0ck1r0ck2
re-cappin' neve
Posts: 704
Joined: Thu Oct 09, 2003 1:55 pm
Location: Milwaukee!!
Contact:
Contact r0ck1r0ck2

Post by r0ck1r0ck2 » Thu Dec 15, 2005 2:09 pm

input/output aux master
quite a few different modules...
and no you don't need an output to make a working strip
Top
Beneficial
pushin' record
Posts: 215
Joined: Sat Sep 11, 2004 5:38 pm
Location: Atlanta, GA

Post by Beneficial » Thu Dec 15, 2005 2:38 pm

Alright, so basically an input module, or an output module could be used. I guess you'd just need different parts. What do most people convert?
Top
User avatar
r0ck1r0ck2
re-cappin' neve
Posts: 704
Joined: Thu Oct 09, 2003 1:55 pm
Location: Milwaukee!!
Contact:
Contact r0ck1r0ck2

Post by r0ck1r0ck2 » Thu Dec 15, 2005 3:58 pm

well...no...
you want an input module...
i don't think the output module would work as a micpre...
could be wrong here....
anyone?
Top
honkyjonk
dead but not forgotten
Posts: 2182
Joined: Wed May 07, 2003 10:50 pm
Location: Portland

Post by honkyjonk » Fri Dec 16, 2005 7:50 am

Just incase anyone is interested, an awesome output transformer replacement is the Cinemag CMOQ-2 series.

CMOQ-2L = half steel/half nickel
CMOQ-2S = 100 percent steel

By the way, any signal in the original board what just routed through one output transformer on it's way out.
The three transformers in each buss/output module were for one output, another redundant output that was exactly the same, and a monitor output.

So nothing was ever going through two or three transformers in series or anything.
Top
hiconfidence
audio school graduate
Posts: 19
Joined: Tue Nov 01, 2005 8:11 am
Location: nyc

Post by hiconfidence » Fri Dec 16, 2005 4:13 pm

i've been waiting to check out the chandler germanium also...they were supposed to ship on 12/01/05 but are delayed because of "missing parts" hmmm?...now they say 01/06...i've seen them listed for an introductory price of $800.00 plus the power supply ...waiting to hear back about getting one to demo...i'll keep you posted...
Top
User avatar
leigh
carpal tunnel
Posts: 1636
Joined: Wed May 07, 2003 11:16 am
Location: Portland, OR
Contact:
Contact leigh

Post by leigh » Tue Feb 14, 2006 11:15 pm

norton wrote:so my money goes with chandler... and only uses top, top, top quality parts.
FYI, there's some folks who've been under the hood of Chandler gear that would very much disagree with this statement:

http://www.prodigy-pro.com/forum/viewto ... heap#40029
http://www.prodigy-pro.com/forum/viewto ... heap#49679

I found this thread looking for opinions on the Germanium... anybody tried one yet?

Leigh
Top
Post Reply

Return to “Creative Recording”

Who is online

Users browsing this forum: No registered users and 30 guests