input/output aux master
quite a few different modules...
and no you don't need an output to make a working strip
Yamaha PM1000 module OR Chandler Germanium?
- r0ck1r0ck2
- re-cappin' neve
- Posts: 704
- Joined: Thu Oct 09, 2003 1:55 pm
- Location: Milwaukee!!
- Contact:
-
- pushin' record
- Posts: 215
- Joined: Sat Sep 11, 2004 5:38 pm
- Location: Atlanta, GA
- r0ck1r0ck2
- re-cappin' neve
- Posts: 704
- Joined: Thu Oct 09, 2003 1:55 pm
- Location: Milwaukee!!
- Contact:
Just incase anyone is interested, an awesome output transformer replacement is the Cinemag CMOQ-2 series.
CMOQ-2L = half steel/half nickel
CMOQ-2S = 100 percent steel
By the way, any signal in the original board what just routed through one output transformer on it's way out.
The three transformers in each buss/output module were for one output, another redundant output that was exactly the same, and a monitor output.
So nothing was ever going through two or three transformers in series or anything.
CMOQ-2L = half steel/half nickel
CMOQ-2S = 100 percent steel
By the way, any signal in the original board what just routed through one output transformer on it's way out.
The three transformers in each buss/output module were for one output, another redundant output that was exactly the same, and a monitor output.
So nothing was ever going through two or three transformers in series or anything.
-
- audio school graduate
- Posts: 19
- Joined: Tue Nov 01, 2005 8:11 am
- Location: nyc
i've been waiting to check out the chandler germanium also...they were supposed to ship on 12/01/05 but are delayed because of "missing parts" hmmm?...now they say 01/06...i've seen them listed for an introductory price of $800.00 plus the power supply ...waiting to hear back about getting one to demo...i'll keep you posted...
FYI, there's some folks who've been under the hood of Chandler gear that would very much disagree with this statement:norton wrote:so my money goes with chandler... and only uses top, top, top quality parts.
http://www.prodigy-pro.com/forum/viewto ... heap#40029
http://www.prodigy-pro.com/forum/viewto ... heap#49679
I found this thread looking for opinions on the Germanium... anybody tried one yet?
Leigh
Who is online
Users browsing this forum: Google [Bot] and 67 guests