RegisterRegister
Log in to check your private messagesLog in to check your private messages
Log inLog in
FAQ  -  SEARCH  -  MEMBERS  -  FAVORITES  -  PROFILE
Akai M8 VU meter circut

 
Post new topic   Reply to topic   printer-friendly view    Tape Op Message Board Forum Index -> DIY Gear
View previous topic :: View next topic  
Author Message
buffalosound
audio school


Joined: 17 Jan 2009
Posts: 6

PostPosted: Tue Dec 20, 2011 3:11 pm    Post subject: Akai M8 VU meter circut Reply with quote

Hello, I am working on my second pair of M8 preamps. I am trying to get the meter to run without the power tube. I purchased some small audio amps that drive the meter nicely but when I tap on the output of the preamp, the output level is decreased. Can I get these to match up? I know I do not understand these circuits fully, I've learned all I know about tube circuitry from this message board. The link has some info on the meter amp. I would appreciate any insight thanks.

JR

http://s12.photobucket.com/albums/a226/beans25/Akai%20M8/ [/url]
Back to top
View user's profile Send private message
Darlington Pair
gettin' sounds


Joined: 03 Jun 2008
Posts: 120
Location: Staunton, VA

PostPosted: Tue Dec 20, 2011 4:34 pm    Post subject: Re: Akai M8 VU meter circut Reply with quote

Sounds like the amps don't have a high enough input impedance to not load down the circuit.
_________________
Darlington Pair
http://eccohollow.bandcamp.com
http://darlingtonpair.bandcamp.com
http://reverbnation.com/darlingtonpair
Back to top
View user's profile Send private message Visit poster's website
RodC
dead but not forgotten


Joined: 31 Dec 2004
Posts: 2036
Location: Right outside the door

PostPosted: Wed Dec 21, 2011 10:05 am    Post subject: Re: Akai M8 VU meter circut Reply with quote

wavley wrote:
Sounds like the amps don't have a high enough input impedance to not load down the circuit.


Prob true.

Also, IIRC the meters in these have a pretty large shunt resistor inside, they work on a speaker level output with just a 5K in series. You may have to open up the meter and change it. (This wont solve your impedance issue, just one more thing to keep in mind)
_________________
'Well, I've been to one world fair, a picnic, and a rodeo, and that's the stupidest thing I ever heard come over a set of earphones'

http://www.beyondsanityproductions.com
http://www.myspace.com/beyondsanity
Back to top
View user's profile Send private message Send e-mail Visit poster's website
buffalosound
audio school


Joined: 17 Jan 2009
Posts: 6

PostPosted: Tue Dec 27, 2011 5:10 pm    Post subject: Re: Akai M8 VU meter circut Reply with quote

Thanks for the input. I found this product through another post:

http://www.jlmaudio.com/shop/index.php?_a=viewProd&productId=19

I wonder if this circuit could be used with the Akai m8 pre? any thoughts?

Thanks!
Back to top
View user's profile Send private message
RodC
dead but not forgotten


Joined: 31 Dec 2004
Posts: 2036
Location: Right outside the door

PostPosted: Tue Dec 27, 2011 11:20 pm    Post subject: Re: Akai M8 VU meter circut Reply with quote

I'm not sure, it is for a balanced input. Someone emailed me this circuit and was about to try it out, but I never had a reply about his success. It would be worth a shot.
_________________
'Well, I've been to one world fair, a picnic, and a rodeo, and that's the stupidest thing I ever heard come over a set of earphones'

http://www.beyondsanityproductions.com
http://www.myspace.com/beyondsanity
Back to top
View user's profile Send private message Send e-mail Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic   printer-friendly view    Tape Op Message Board Forum Index -> DIY Gear All times are GMT - 4 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum