RegisterRegister
Log in to check your private messagesLog in to check your private messages
Log inLog in
FAQ  -  SEARCH  -  MEMBERS  -  FAVORITES  -  PROFILE
Fostex E-16 tape counter runs at 1/2 speed

 
Post new topic   Reply to topic   printer-friendly view    Tape Op Message Board Forum Index -> Gear Talk
View previous topic :: View next topic  
Author Message
leftofthedial
takin' a dinner break


Joined: 17 Apr 2006
Posts: 197
Location: Charlotte, North Carolina, USA

PostPosted: Thu May 03, 2012 5:09 pm    Post subject: Fostex E-16 tape counter runs at 1/2 speed Reply with quote

I recently picked up an E-16 on eBay in pretty darn good shape. I've cleaned it up nice and aligned and calibrated and have been able to solve almost every problem except 2 minor nuisances.

1) The tape counter runs at 30ips which means when I run the unit at the normal 15ips, it logs time at half speed. There is some crude mod on the capstan motor that lets me flip a switch to run at 15ips or 30ips. But no markings on the unit itself to indicate it was factory modded to run at 30ips. Anyway, I am only really interested in running at 15 ups, so it would be great to solve this one. I have fiddled with the jumpers on the capstan and pretty know much how that all works, but it seems to have zero effect on the tape counter.

2) on the remote, channel 16 just blinks. Won't arm. Disconnect the remote, channel 16 is fine.

BTW, the remote has a speed selector and tracks time correctly in both 30ips and 15 ups assuming it is in the same mode as the machine.

Any insight would be greatly appreciated. fYI I also have the service manual but it has been years since I could 100% read one of these things.
_________________
They mostly come at night..... Mostly.
Back to top
View user's profile Send private message Visit poster's website
Studiodawg
gettin' sounds


Joined: 24 Feb 2006
Posts: 100
Location: USA

PostPosted: Fri May 04, 2012 11:03 am    Post subject: Re: Fostex E-16 tape counter runs at 1/2 speed Reply with quote

2) the ribbon cable might be bad for channel 16
Back to top
View user's profile Send private message
leftofthedial
takin' a dinner break


Joined: 17 Apr 2006
Posts: 197
Location: Charlotte, North Carolina, USA

PostPosted: Fri May 04, 2012 4:07 pm    Post subject: Re: Fostex E-16 tape counter runs at 1/2 speed Reply with quote

Problem 2 is now solved. Broken circuit board trace. Fixed with jumper wire.
_________________
They mostly come at night..... Mostly.
Back to top
View user's profile Send private message Visit poster's website
getreel
carpal tunnel


Joined: 15 Mar 2004
Posts: 1512
Location: The Oldest Town in Texas

PostPosted: Sat May 19, 2012 2:29 pm    Post subject: Re: Fostex E-16 tape counter runs at 1/2 speed Reply with quote

E16s are pretty good sounding and reliable machines for their age. I used to own 1 and liked it quite a bit. Sounded very good for 1/2" tape and was extremely reliable. Good on you for fixing the issues and using such a machine.
_________________
Grady
studio.encoremc.com
www.absolutewebdev.net
www.fastactingrecords.com
Back to top
View user's profile Send private message Send e-mail Visit poster's website
leftofthedial
takin' a dinner break


Joined: 17 Apr 2006
Posts: 197
Location: Charlotte, North Carolina, USA

PostPosted: Fri Jun 01, 2012 7:51 pm    Post subject: Re: Fostex E-16 tape counter runs at 1/2 speed Reply with quote

Figured out problem 2. There is a connector header on the control board that switches between low speed and high speed capstan speed. In theory, a switch could be installed here to select from 1 of 2 capstan motor speeds. However, the dumbass that made the original mod to allow this machine to run at 15/30ips did it the hard way.
_________________
They mostly come at night..... Mostly.
Back to top
View user's profile Send private message Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic   printer-friendly view    Tape Op Message Board Forum Index -> Gear Talk All times are GMT - 4 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum