RegisterRegister
Log in to check your private messagesLog in to check your private messages
Log inLog in
FAQ  -  SEARCH  -  MEMBERS  -  FAVORITES  -  PROFILE
Mic Splitter Project

 
Post new topic   Reply to topic   printer-friendly view    Tape Op Message Board Forum Index -> DIY Gear
View previous topic :: View next topic  
Author Message
bluesman
re-cappin' neve


Joined: 04 Jun 2004
Posts: 655
Location: Little Rock, Arkansas

PostPosted: Fri Jun 01, 2012 3:07 pm    Post subject: Mic Splitter Project Reply with quote

Does anyone here have any experience using the Edcor 600/600 mic splitter transformer? I have recently purchased some Horizon MS-4, 4 channel mic splitters & am thinking about a possible transformer upgrade using the Edcor. I plan on doing live night club recording & splitting house mics to use my own preamps to the recorder. I know that the Jensen transformer is supposed to be the best....but using 20 channels of the Edcor @ $216.60 vs Jensen for $1240 would leave me with a little money left over for whiskey & wimmin.

Thanks
_________________
"The digital future sucks the boils off my white ass." McHugh
Back to top
View user's profile Send private message
The Scum
deaf.


Joined: 04 Jul 2003
Posts: 1994
Location: Denver, CO

PostPosted: Fri Jun 01, 2012 7:28 pm    Post subject: Re: Mic Splitter Project Reply with quote

I don't know those specific Edcors, but I've used their 600:600 output iron before. They're well made and affordable, but not exactly sexy.

My gut feeling is that Edcor would be on par with the original Horizon transformers. Not the upgrade the Jensen would be.
_________________
"What fer?"
"Cat fur, to make kitten britches."
Back to top
View user's profile Send private message Visit poster's website
scrotescape
audio school graduate


Joined: 18 Jan 2011
Posts: 10
Location: shakizzle illinizzle

PostPosted: Sun Jun 03, 2012 7:34 am    Post subject: split Reply with quote

what are the house mics, and acoustics like--transformer might not be the weak link, put in 2 or 4 jensens for the most important feeds and the rest cheepies.
_________________
when are you coming back from Japan Mr. Med?
Back to top
View user's profile Send private message
kslight
george martin


Joined: 13 Oct 2009
Posts: 1255

PostPosted: Sun Jun 03, 2012 11:23 am    Post subject: Re: Mic Splitter Project Reply with quote

I don't exactly have a high-end setup for live recording but I have a "poor man's" mic splitter snake (no transformers, just hardwired splits) that I got from Audiopile, and in my rack I carry 4 channels of transformer isolated splits if I need it (haven't used it yet).

I personally tend to agree that the transformer used on the split is not going to be the weak point at most gigs, I'd try it with what you've got before you drop any money into it...
Back to top
View user's profile Send private message
bluesman
re-cappin' neve


Joined: 04 Jun 2004
Posts: 655
Location: Little Rock, Arkansas

PostPosted: Mon Jun 04, 2012 2:17 pm    Post subject: Re: split Reply with quote

scrotescape wrote:
what are the house mics, and acoustics like--transformer might not be the weak link, put in 2 or 4 jensens for the most important feeds and the rest cheepies.


The house mics will be replaced with my own microphones whenever I feel it necessary....and the acoustics will vary with every location.....acoustics only matter when I am using room mics....if the room is bad, I won't be using any room mics.

I would love to have all Jensen transformers if money permitted....and it may, in time. In the mean time, I was wondering if anyone has any experience with the Edcor transformers, which are affordable enough for the moment, but pointless if they are of marginal quality.

I have heard recordings that were made with my current setup....they sounded good. Since good is good, unless people start chiming in with glowing Edcor reports, I will probably continue with my Horizon splitters as is until I find the ultimate Jensen deal.
_________________
"The digital future sucks the boils off my white ass." McHugh
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic   printer-friendly view    Tape Op Message Board Forum Index -> DIY Gear All times are GMT - 4 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum