RegisterRegister
Log in to check your private messagesLog in to check your private messages
Log inLog in
FAQ  -  SEARCH  -  MEMBERS  -  FAVORITES  -  PROFILE
Available kits for DIY assembly
Goto page Previous  1, 2, 3, 4, 5, 6
 
Post new topic   Reply to topic   printer-friendly view    Tape Op Message Board Forum Index -> DIY Gear
View previous topic :: View next topic  
Author Message
ghaines
alignin' 24-trk


Joined: 30 Nov 2003
Posts: 68
Location: Pittsburgh, PA

PostPosted: Tue Apr 02, 2013 5:43 pm    Post subject: Re: Available kits for DIY assembly Reply with quote

This one shot thing is so cool. I've always wanted your DIs out on the floor vs in the rack. Plus you can take the pre amps to ribbon mics... this is so cool.
_________________
Senior Contributor, Tape Op
Chief Mastering Engineer, Treelady Studios - Pittsburgh, PA

www.treelady.com Treelady Mastering, Pittsburgh, PA
Back to top
View user's profile Send private message Visit poster's website
SeventhCircle
gettin' sounds


Joined: 07 May 2003
Posts: 103
Location: Oakland, CA

PostPosted: Thu Jul 11, 2013 10:02 pm    Post subject: Seventh Circle Audio - CH02 Chassis Now Shipping Reply with quote



New and improved CH02 chassis kits are now shipping! Just some of the many improvements include:

  • New power supply, PS04, mounted on right side of chassis.
  • Fuse easily accessible on back panel.
  • Illuminated logo indicates power supply health on front panel.
  • Power switch wiring is simpler, low-voltage, and DC.
  • Front sub-panels have counter-bored screw holes for a cleaner look.
  • Closer part tolerances for easier assembly.

Updated assembly instructions with many more photos are up now.

For those who don't know, the CH02 is a road-worthy 2RU chassis designed to hold up to eight Seventh Circle modules in any combination. Standard features include:

  • High voltage supply rails can offer almost double the headroom of a standard 500-series rack.
  • Rugged, heavy gauge cold rolled steel for superior durability and shielding from external magnetic fields.
  • Super-strong 3/16" aluminum front panels with black anodized finish and white laser engraving.
  • Clear chromate plating for excellent grounding.
  • Eight internal dividers to support heavy modules.
  • Split rear flange for easy module installation.
  • Power supply compatible with any mains voltage world-wide.
  • Incredible value
  • Designed and built in USA

We're still ramping up, so expect a 3 to 5 day lead time before your order ships.

Back to top
View user's profile Send private message Send e-mail Visit poster's website
agershon
gettin' sounds


Joined: 08 Dec 2012
Posts: 107
Location: Los Angeles, CA

PostPosted: Fri Jul 12, 2013 12:00 pm    Post subject: Re: Available kits for DIY assembly Reply with quote

Congrats on the new release, Tim!

I have one question: I have a "v2" chassis ... will you still have not-counter-bored sub panels available to match the ones I already have?

Thanks,
Adam.
_________________
Fu Dog Studio
Back to top
View user's profile Send private message Visit poster's website
SeventhCircle
gettin' sounds


Joined: 07 May 2003
Posts: 103
Location: Oakland, CA

PostPosted: Fri Jul 12, 2013 2:47 pm    Post subject: Re: Available kits for DIY assembly Reply with quote

Quote:
will you still have not-counter-bored sub panels available to match the ones I already have?


Probably for a while yet. Let us know your preference when you place an order.
Back to top
View user's profile Send private message Send e-mail Visit poster's website
JPK
audio school


Joined: 14 Nov 2007
Posts: 7
Location: Auch, France

PostPosted: Sat Jul 13, 2013 10:36 am    Post subject: Sound Skulptor CP5176 - FET Compressor in 500 series format Reply with quote

Sound Skulptor CP5176 - FET Compressor in 500 series format



The CP5176 is a FET compressor based on the design that was originally used in the 1176 compressor, which has been adapted to the '500' format of API*.

    500 series format,
    Original Cinemag transformers on input and output,
    All discrete, class A audio path,
    DOA based, API* 2520 compatible, output stage,
    5 ratios + SLAM mode (all buttons mode),
    Optional High pass filter in the side chain,
    Distorsion mode adds 3% of second harmonic, close to Rev A,
    Stereo linkable,
    High resolution gain reduction meter,
    Available assembled or as a full kit.

Full details are available here: http://www.soundskulptor.com/uk/cp5176.html
_________________
JPK
www.soundskulptor.com


Last edited by JPK on Mon Apr 13, 2015 10:45 am; edited 2 times in total
Back to top
View user's profile Send private message Visit poster's website
JPK
audio school


Joined: 14 Nov 2007
Posts: 7
Location: Auch, France

PostPosted: Fri May 16, 2014 11:07 am    Post subject: Sound Skulptor 501 - Single 500 Series Host Reply with quote

Sound Skulptor 501 - Single 500 Series Host



The 501 is a single slot, 500 series compatible case with power supply.

    Delivers +16V and -16V rails and 48V phantom,
    Auxiliary jack socket can be connected to any I/O signal such as compressors stereo link,
    Several 501's can be stacked to create a custom lunchbox,
    Very low noise power supply,
    Works from any 12 Volts DC power source, including a battery,
    comes with a 12V power adapter,
    Gold plated Neutrik connectors,
    Double DC plug allows daisy chaining several 501,

Full details are available here: http://www.soundskulptor.com/uk/501.html
_________________
JPK
www.soundskulptor.com
Back to top
View user's profile Send private message Visit poster's website
JPK
audio school


Joined: 14 Nov 2007
Posts: 7
Location: Auch, France

PostPosted: Mon Apr 13, 2015 10:46 am    Post subject: Sound Skulptor MP566 Tube Preamplifier for the 500 series Reply with quote

Sound Skulptor MP566 Tube Preamplifier for the 500 series




The MP566 is a dual-triode vacuum tube circuit preamplifier based on a design that has been used in several famous devices from the 50's, which has been adapted to the '500' format of API*.
With its fully powered triodes and its two transformers, the MP566 brings the most fulfilling warmth and color to your Lunchbox.

    - Dual triode design,
    - Input and output transformers,
    - High 68dB gain will please the most demanding ribbon mics,
    - Variable input and output levels for total control over tube saturation,
    - 2 different negative feedback levels (Mid/High Gain) for sweet or more aggressive sound,
    - Input pad (Low Gain) for hot mics or line levels,
    - Full 225 Volts tube supply and full 150mA tube heater,
    - 1/4" DI jack, high impedance input for instruments or line,
    - Total current draw less than 160 mA,
    - Available assembled or as a full kit (everything included).

Full details are available here: http://www.soundskulptor.com/uk/mp566.html
_________________
JPK
www.soundskulptor.com
Back to top
View user's profile Send private message Visit poster's website
Zeppelin Design Labs
audio school graduate


Joined: 04 Nov 2015
Posts: 10
Location: Chicago, Illinois USA

PostPosted: Fri Jan 29, 2016 5:42 pm    Post subject: DIY Guitar Amps, Contact Mic Reply with quote

Percolator 2W Tube Amp DIY Kit
http://zeppelindesignlabs.com/product/percolator-2w-amp-kit/
Built around a single 6AF11 NOS tube. Available with or without cabinet enclosure.

Percolator 2W 1x8 Combo Tube Amp DIY Kit
http://zeppelindesignlabs.com/product/percolator-2w-1x8-combo-assembled-finished/

Cortado Buffered Balanced Piezo Contact Microphone DIY Kit
http://zeppelindesignlabs.com/product/cortado-balanced-piezo-contact-mic/
Includes a little PCB for making your own preamp to balance the signal and match the impedance of the piezo disc output to your recorder's input. Requires phantom power.
_________________
Glen van Alkemade
Zeppelin Design Labs LLC, Chicago
www.zeppelindesignlabs.com
Back to top
View user's profile Send private message Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic   printer-friendly view    Tape Op Message Board Forum Index -> DIY Gear All times are GMT - 4 Hours
Goto page Previous  1, 2, 3, 4, 5, 6
Page 6 of 6

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum