ok, so i've finally decided to give up my ADATs and start recording to hard disk...
here's what i thought my plan would be.
i've already got these ADAT's, right? so wouldn't it seem logical to use the ADATs as A/D converters and buy a Dakota card with 16 channels of lightpipe and use the ADAT front end to bring the audio into the PC?
well, this is what i thought.
my setup is this: ADAT to lightpipe to DAKOTA to Adobe Audition. I have the 9 pin sync cables connected from ADAT 1 to ADAT 2 to PC, as per the "why doesn't someone at Frontier upgrade this pitifully out of date" manual.
in the frontier control panel, i've got all green on the two optical inputs, but all the channels are redded out, and i have no actual audio coming into my PC at all. i'm using existing ADAT tapes to test, and am trying to import some of my old stuff.
why can't my computer hear them? i've checked and double checked the lightpipe connectors to make sure that everything is connected the way it should be. i can't think of anything else, in terms of why there's no meters or audio going into the PC.
someone is reading this and laughing their asses off, thinking to themselves, "what a doofus!"
that's actually the guy i want to hear from...the one who already knows exactly what i'm doing wrong.
T
about to show just how green i am...
-
- gettin' sounds
- Posts: 124
- Joined: Mon Dec 01, 2003 5:26 am
- Location: philadelphia, pa
- Contact:
about to show just how green i am...
http://www.tomhampton.com
guitar, lap and pedal steel, mandolin, dobro, banjo, other various oddities and harmony slut
guitar, lap and pedal steel, mandolin, dobro, banjo, other various oddities and harmony slut
-
- audio school graduate
- Posts: 15
- Joined: Wed Apr 14, 2004 5:51 pm
- Location: Atlanta GA
- Contact:
-
- takin' a dinner break
- Posts: 192
- Joined: Sat Nov 05, 2005 3:56 pm
- Location: Idaho (On The Causeway to Neverwhere)
This sounds like it could be a million things. I would guess that its a driver issue first. I would look at that. Make sure you have the newest drivers possible for audition and for the Dakota. Make sure those can talk to each other. Some PC boards don't some PIC cards. That might be an issue.
Is you lightpipe going both ways? If it is the computer can slave to the adats from that(which is a bad idea to use it like that, but might be worth checking).
Does the dakota only have lightpipe in and out? If it has other I/O plug another divice (not the adat) into that and try it out.
Did you get the right adat sync cabels?
Thats about all I can think of.
Im sure someone will post on this when daylight hits and give you the right answer if none of that helped.
Is you lightpipe going both ways? If it is the computer can slave to the adats from that(which is a bad idea to use it like that, but might be worth checking).
Does the dakota only have lightpipe in and out? If it has other I/O plug another divice (not the adat) into that and try it out.
Did you get the right adat sync cabels?
Thats about all I can think of.
Im sure someone will post on this when daylight hits and give you the right answer if none of that helped.
"What a wonerful smell you've discovered"
-
- gettin' sounds
- Posts: 124
- Joined: Mon Dec 01, 2003 5:26 am
- Location: philadelphia, pa
- Contact:
some success
well, oddly enough, my problem seems to be with audition.
i installed samplitude 7 and it works like a charm. i can import up to sixteen tracks at a time without any issues whatsoever.
what i have to do now is get my hands on a timecode primer and start figuring that out...i've never needed to before. now, though, there are instances where i'm going to have to slave the adat machines off my computer, or vice versa, and i have no idea how to go about that. time to start googling.
still a little bummed about the audition thing, because i want to know what it is that i'm doing wrong...but it's all good. i'm up and working now.
T
i installed samplitude 7 and it works like a charm. i can import up to sixteen tracks at a time without any issues whatsoever.
what i have to do now is get my hands on a timecode primer and start figuring that out...i've never needed to before. now, though, there are instances where i'm going to have to slave the adat machines off my computer, or vice versa, and i have no idea how to go about that. time to start googling.
still a little bummed about the audition thing, because i want to know what it is that i'm doing wrong...but it's all good. i'm up and working now.
T
http://www.tomhampton.com
guitar, lap and pedal steel, mandolin, dobro, banjo, other various oddities and harmony slut
guitar, lap and pedal steel, mandolin, dobro, banjo, other various oddities and harmony slut
Who is online
Users browsing this forum: No registered users and 55 guests