Weller soldering stations
- RodC
- dead but not forgotten
- Posts: 2039
- Joined: Thu Dec 30, 2004 8:53 pm
- Location: Right outside the door
- Contact:
Tips do seem to last longer, my current tip is about 1 year old. And I spent this weekend modding 2 old preamps and recapping a '74 SVT. There were some large dirty connections in there!
Plus my sons used the same station to rewire 2 guitars, replacing the vol pots. (You know what the grounds are like on those)
If a tip gets really bad try this
Clean it up with steel wool while its hot.
Let it cool completly
Use very fine sand paper to remove the dirt and factory tin job
Clean it with rosin if you have any.
This seems like the important step, as your iron is heating up re-tin the tip with good rosin core solder.
This trick works on Weller tips real well.
Many ppl who go through tips this fast are using too small of a tip. Smaller tips are for real small work. If you use too small of a tip you also have less space to transfer the heat to the work. Buy a few different sizes and try them out. This can actulay cause you to over heat the work. The faster you can transfer the heat to the portion of the work that needs soldered the better off you are.
Most componets are not runied because the Iron was too hot, but the work piece was heated too long resulting in more heat transfer to the parts that were not intened to be heated.
A common mistake ppl make is to turn down the heat on sensitive components, this can prolong the work as well.
Clean tip, Well tined, allow the tin job to transfer the heat. The tip will not transfer heat, liquid solder will. Just get a hot pan out of the oven with a wet mit and you will discover the seceret to soldering.
Plus my sons used the same station to rewire 2 guitars, replacing the vol pots. (You know what the grounds are like on those)
If a tip gets really bad try this
Clean it up with steel wool while its hot.
Let it cool completly
Use very fine sand paper to remove the dirt and factory tin job
Clean it with rosin if you have any.
This seems like the important step, as your iron is heating up re-tin the tip with good rosin core solder.
This trick works on Weller tips real well.
Many ppl who go through tips this fast are using too small of a tip. Smaller tips are for real small work. If you use too small of a tip you also have less space to transfer the heat to the work. Buy a few different sizes and try them out. This can actulay cause you to over heat the work. The faster you can transfer the heat to the portion of the work that needs soldered the better off you are.
Most componets are not runied because the Iron was too hot, but the work piece was heated too long resulting in more heat transfer to the parts that were not intened to be heated.
A common mistake ppl make is to turn down the heat on sensitive components, this can prolong the work as well.
Clean tip, Well tined, allow the tin job to transfer the heat. The tip will not transfer heat, liquid solder will. Just get a hot pan out of the oven with a wet mit and you will discover the seceret to soldering.
-
- moves faders with mind
- Posts: 2746
- Joined: Thu Jul 03, 2003 11:26 pm
- Location: Denver, CO
- Contact:
I'm still using the tip my Weller station came with. 10 years old and still ticking. With a damp sponge, it cleans up to be like new. I bought a spare tip with the station that's still in the package.I run through tips pretty quickly, (yes I keep them very clean) so i'm wondering if the tips last longer on these soldering stations or something? How often do you guys change a tip?
Byron Jacquot
-
- gimme a little kick & snare
- Posts: 92
- Joined: Mon Sep 27, 2004 9:56 am
- Location: the bluegrass state
Wow, thanks for all the input everyone (and sorry for the belated response, I'm in the midst of finals here). I guess I have a lot to think over before I settle on a station to get. I'll have to look over the options some more. Thanks
"Don't worry about me, I've got a bed. I've got a Christmas tree inside my head."
http://www.myspace.com/somniferumky
http://www.myspace.com/wurmkraut
http://www.myspace.com/somniferumky
http://www.myspace.com/wurmkraut
-
- buyin' gear
- Posts: 564
- Joined: Wed May 07, 2003 9:05 am
Re: Hakko tips
I've built a years worth of kits and cables, and tip is still well shaped and clean.
Here's the one I got...couldn't be happier.
http://www.all-spec.com/1/viewitem/936- ... o?sp=Hakko
kb
I've built a years worth of kits and cables, and tip is still well shaped and clean.
Here's the one I got...couldn't be happier.
http://www.all-spec.com/1/viewitem/936- ... o?sp=Hakko
kb
I guess I should probably just pony up the bucks for a hakko unit since they've been endorsed by the Diy'ers.
But those circuitspecialist units "look" like exactly the same thing as a hakko but half the price.
Plus, that website sells Protek oscilloscopes, 1 of which I have. It's a really nice, rock solid scope, but I don't know. That doesn't necessarily say anything about their soldering stations.
Boy oh boy. That site makes it seem like these guys are just one of those really cool small internet businesses that sells stuff at good prices, ala Redco or something. But again, I've never dealt with them.
But those circuitspecialist units "look" like exactly the same thing as a hakko but half the price.
Plus, that website sells Protek oscilloscopes, 1 of which I have. It's a really nice, rock solid scope, but I don't know. That doesn't necessarily say anything about their soldering stations.
Boy oh boy. That site makes it seem like these guys are just one of those really cool small internet businesses that sells stuff at good prices, ala Redco or something. But again, I've never dealt with them.
- Brett Siler
- moves faders with mind
- Posts: 2518
- Joined: Fri Dec 05, 2003 12:16 pm
- Location: Evansville, IN
- Contact:
I like this topic. Time to up grade from my Radio Shack solidering iron
My musical endeavors!
My Music: http://www.brettsiler.bandcamp.com/
StudioMother Brain Sound Infrastructure
My Music: http://www.brettsiler.bandcamp.com/
StudioMother Brain Sound Infrastructure
Who is online
Users browsing this forum: No registered users and 53 guests