i need help with wiring piece of gear-electrodyne eq
i need help with wiring piece of gear-electrodyne eq
hi-i recently came across an electrodyne 2-band dial eq unit, i believe this came out of a board. unfortunately, all i know from the person i got this from is that it runs on 24vdc. is there any way i can discern what leads should go to what on the back of this unit? there are a total of 10 leads, two of them looking like they are jumpered together already. they lead to what i believe is the input transformer. i have tried several combinations, but have no luck. thanks for any help. sp-if a picture of the circuit output would help, i could take one.
- Milkmansound
- george martin
- Posts: 1253
- Joined: Sun Feb 22, 2004 3:15 pm
- Location: San Francisco, CA
- Contact:
are you the RJD2???
(((((((((((((((((((((((((())))))))))))))))))))))))))))
www.pedalsteelamp.com
www.milkmansound.com
Follow me on Facebook!
www.pedalsteelamp.com
www.milkmansound.com
Follow me on Facebook!
- winky dinglehoffer
- buyin' a studio
- Posts: 814
- Joined: Wed May 07, 2003 12:08 pm
- Location: ATL
thanks, if you guys can help me with this i will be quite grateful. here are the flicks:
You have been invited to visit a photo album
http://photobucket.com/albums/e243/rjd2rjd2/
on "eq3", you can see there are a total of 10 connects(the wide one in the middle is split to two on the harness). the RIGHT four outputs all connect to the input transformer on the other side. thoughts?
You have been invited to visit a photo album
http://photobucket.com/albums/e243/rjd2rjd2/
on "eq3", you can see there are a total of 10 connects(the wide one in the middle is split to two on the harness). the RIGHT four outputs all connect to the input transformer on the other side. thoughts?
- Milkmansound
- george martin
- Posts: 1253
- Joined: Sun Feb 22, 2004 3:15 pm
- Location: San Francisco, CA
- Contact:
well we know which one the ground bus is! Look at that fat ass trace!
RJ - I do not know if you remember me, but I was the tech when you played at Nectars in Burlington, VT last winter.
RJ - I do not know if you remember me, but I was the tech when you played at Nectars in Burlington, VT last winter.
(((((((((((((((((((((((((())))))))))))))))))))))))))))
www.pedalsteelamp.com
www.milkmansound.com
Follow me on Facebook!
www.pedalsteelamp.com
www.milkmansound.com
Follow me on Facebook!
i think the round black can is an inductor. no?
try ken hirsch at orphan audio, he'll know the pinout.
www.orphanaudio.com
try ken hirsch at orphan audio, he'll know the pinout.
www.orphanaudio.com
- Milkmansound
- george martin
- Posts: 1253
- Joined: Sun Feb 22, 2004 3:15 pm
- Location: San Francisco, CA
- Contact:
on first look that black can looked like an opamp to me too. Especially since you can kind of make out an arrow kind of on the top, and from the underside it appears that the legs are in a circle.
of course, the photos are really hard to draw conclusions from since they are blurry and out of focus - better photos will help here
of course, the photos are really hard to draw conclusions from since they are blurry and out of focus - better photos will help here
(((((((((((((((((((((((((())))))))))))))))))))))))))))
www.pedalsteelamp.com
www.milkmansound.com
Follow me on Facebook!
www.pedalsteelamp.com
www.milkmansound.com
Follow me on Facebook!
Who is online
Users browsing this forum: No registered users and 61 guests