Hi all,
Appreciate any help.
Went to use the Tascam 424 mkIII the other day, having not been touched since last functioning properly (about 2 weeks), and found the following problem: There is no playback sound being played from a known working/recorded on cassette. No activity on the VU meters.
Similarly, though I can hear in headphones the sound of a mic or instrument when plugged into an armed channel (monitoring) there is no signal activity in the VU meter, though properly armed and routed for recording.
Does anyone have an idea of where the problem may lie? I can expand on the signal path or any other specifics that might help problem solve this.
The cassette mechanism works fine. I can hear inputs through the mixer. But, there is no signal being read off a cassette with tracks on it, nor does the VU meter acknowledge the sounding/working input.
Thanks for any help/insight/leads.
Tascam 424 mkiIII Recording Problem
thanks for the reply. yeah, heads have been cleaned regularly.
it doesn't usually read while not in record but now it isn't reading in record or reading (or playing) on playback (though i can hear the monitor send(?) of the input, i.e. a mic on channel 1---so even when armed for record I can hear the input but it doesn't read on the VU). (The actual mechanics of the tape play/work fine, i.e. play, ff, rew)
it doesn't usually read while not in record but now it isn't reading in record or reading (or playing) on playback (though i can hear the monitor send(?) of the input, i.e. a mic on channel 1---so even when armed for record I can hear the input but it doesn't read on the VU). (The actual mechanics of the tape play/work fine, i.e. play, ff, rew)
Yes, I have, with unfortunately the same result. No sound, no activity on the VU meters. If I crank the level I can hear some white noise so the headphone jack is working (similarly, when an instrument or mic is inserted into the 1/4 inch or xlr of a channel armed for recording I can hear ((through the mixer? monitor?)) the signal, but similarly no activity on the VU meter)
Who is online
Users browsing this forum: No registered users and 125 guests