Hi,
i'm designing my patchbay to improve the workflow in my studio. Yes, I'm not getting new outboard this Christmas, just cables...
I've been advised against using bantam patchbays for the mic signal (mics outs and pres ins ). It seems like XLR patch bays are the safest option.
Considering I've already got 4 bantam patch bays (Rean and Switchcraft) that came with the tape deck and that XLR patch bays are bigger and more expensive I wonder if it's really so so bad using just TT for all the connections.
I guess I just need to be careful with Phantom and delicate mics ?
Bantam Patchbay for Mic signal
- A.David.MacKinnon
- ears didn't survive the freeze
- Posts: 3829
- Joined: Wed May 07, 2003 5:57 am
- Location: Hamilton ON, Canada
- Contact:
My studio is running live room snakes on a bantam bay. Many others I've worked at have done the same. In our case it's because the patchbay is part of the console and wiring in XLR bays would be a massive pain in the ass.
You need to be extremely careful not to patch with phantom engaged. You also need to be extra careful not to patch mic ins to anything other than mic lines and engage phantom (nothing worse then sending voltage to a compressor or whatever).
Beyond that it's fine and everything works as it should. We have yet to blow anything up.
You need to be extremely careful not to patch with phantom engaged. You also need to be extra careful not to patch mic ins to anything other than mic lines and engage phantom (nothing worse then sending voltage to a compressor or whatever).
Beyond that it's fine and everything works as it should. We have yet to blow anything up.
- Nick Sevilla
- on a wing and a prayer
- Posts: 5584
- Joined: Mon Mar 03, 2008 1:34 pm
- Location: Lake Arrowhead California USA
- Contact:
I second David's post.
I've worked for years in pro studios that have their entire mic lines coming up on bantam TT patchlines, with no issues at all.
They are just mechanical connections.
And yes, you do have to ensure you do NOT engage phantom power until you have everything patched up properly.
Cheers
I've worked for years in pro studios that have their entire mic lines coming up on bantam TT patchlines, with no issues at all.
They are just mechanical connections.
And yes, you do have to ensure you do NOT engage phantom power until you have everything patched up properly.
Cheers
Howling at the neighbors. Hoping they have more mic cables.
Thanks!
That's good news, I'm saving some money. And It makes more sense to have only one kind of connection.
If you don't mind , I've got another question about this.
My mixer , a Studer 963, has a TT patchbay (semi- normalized) with the sends and returns for all the channels.
Those sends and returns are not at the back of the mixer . They are just accessible via that patch bay.
My question is can I connect those send/returns to the main patchbay ?
Maybe is not a good idea to patchbay an already patchbayed connection?
That's good news, I'm saving some money. And It makes more sense to have only one kind of connection.
If you don't mind , I've got another question about this.
My mixer , a Studer 963, has a TT patchbay (semi- normalized) with the sends and returns for all the channels.
Those sends and returns are not at the back of the mixer . They are just accessible via that patch bay.
My question is can I connect those send/returns to the main patchbay ?
Maybe is not a good idea to patchbay an already patchbayed connection?
Max RB
Who is online
Users browsing this forum: No registered users and 177 guests