Message Board

X-72mk500 Mic Preamp - 500 Series





UK/Carnhill input and output transformers
option to use discrete opamp

Big bottom sounding, punchy, clear...

www.fivefishstudios.com

Available as KITS (and for limited time, pre-assembled and ready-made for same price as Kits)

www.fivefishstudios.com

Starting up a PM1000 strip should be instant.

Isolate the problem one by one.

PSUs giving the right voltage? Instantly? when you turn it on? Should be, there is no "warmup time"

Are the PM1000 modules working properly? Same thing. It should turn on instantly. No "warmup time"

API 500-Series Lunchbox Format Preamp SC-1mk500 by FiveFish Studios http://www.fivefishstudios.com/ffimages/SC-1mk500Preamps.jpg http://www.fivefishstudios.com/ffimages/SC-1mk500-3channels.jpg Running a special promo... $369 pre-assembled (same price as the kit)... with Input transformers. As pictur...

No need to cut legs. You can just use a hot-air rework station. Heat it up, then remove chip with a vacuum pen or tweezer.

A lot of people racking PM1000 are using my PSUs. Both rails regulated and adjustable via onboard trimmers. 2 onboard LEDs for power indicator for both rails. You can wire these LEDs to your front panel ON indicator. http://www.fivefish.net/diy/PSU4448/images/psu4448mk2.jpg It will work with the 18-...

I have a new 500-series Mic Preamp Kit.

SC-1mk500

Photos:

The successor to our highly successful SC-1 mic preamp, I present the SC-1mk2 preamp.

Check out the website for packaged deals and discounted combo orders.
http://www.fivefishstudios.com

The voltage regulators on my PSU are rated 1.5 Amps.

The trafo I sell are 30VA. You can use a higher VA transformer if you'll draw more power, not to exceed the max rating on the regulator.

Have you checked out Apex Jr?

http://apexjr.com/amps.html

Are your cables and/or jacks good?... i.e. not making intermittent connection?

Sometimes I use a hot air gun (rework station). move around in circles and soon the lead becomes soft (not liquidy) that you can lift up the part (even if they're multiple pins). Or as fum said, sacrifice the part, cut the component, and just use a tweezer or hemostat clamps to pull the lead out whi...

What sort of specs should I look for in a new fan aside from noise ratings and power consumption? Noise rating and power consumption are the least of the worries. Look at CFM, and dimensions. Match these two and hope you can find a quieter one. But you see, the larger the CFM, the noisier it is. Pu...

Great job! Nice!

You need

HEADON!...APPLY DIRECTLY TO THE FOREHEAD!
HEADON... APPLY DIRECTLY TO THE FOREHEAD!