Message Board

bump for price drop. will ship, too. put an offer on the table if you're interested!

Up for sale is my Trident Fleximix in great condition. 12 channels, master section, monitor section, with 8 channel buss chassis. Lots of upgrades on this: -a new, heavy duty PSU. -new overbuilt copper bus bar. -all channels recapped and signal path upgraded. -master section recapped. Pickup preferr...

i'm building out a pair of RS 124's at the moment, and the output trannies are about 1cm too high for my 2U case. i need to find a way to house them safely, and properly. there is enough room for me to properly zip tie them to the pcb, however, it seems potentially half assed, if the zip ties were e...

thanks-i think i may just do a conversion to 16w amp on it, and look for a separate driver for a tank. ironically, it seems almost impossible to find anyone using one of these as....a reverb unit amp...

how are these? http://www.captain-foldback.com/Hammond_sub/schematics/AO44.jpg yea, it looks like it's meant to drive an 8 ohm speaker. i actually think that wiring this with a speaker jack and driving an 8ohm peripheral cab is an option for me, although i was hoping to have it function as an effect...

hey folks, i'm intending to wire up one of these Hammond H-AO-44-1 units to a standalone reverb box, kinda like the fender ones from the 60's. Can one of you help me with the input/output wiring? There are 6 terminals labeled "sig. input, driver, speaker" on the back. Here's a link to a listing for ...

thanks!

hey all, i could have sworn that power one made this unit. i have googled and searched til my eyeballs hurt, and cannot for the life of me find it. has anyone ever used or know of one of these? thanks for the help...

Hey folks, so I've almost completed racking up a set of early Ward Beck modules, and one of them has a problem. model=M441. When I bought it, i was told that the 2n5439 transistor needed to be replaced-seller included a replacement. i replaced it, but the unit still didnt pass signal. i then replace...

thanks alot, everyone. the power one/intl power PSU worked out.

Hi folks, I'm racking up a set of Ward Beck M402s and M441's, and having some confusion on the grounding issue. docs: http://www.wikigear.org/wiki/index.php?title=WBS_M441M http://www.wikigear.org/wiki/index.php?title=WBS_M402A here is the PSU i'm using: http://www.mouser.com/ProductDetail/Internati...

thanks! stupid switching PSUs. hate them. got another one.

hey folks, hope someone could take a quick glance at my math here and make sure i'm doing this right? im gonna be powering 6 modules that run on 48vdc and each draw 65mA. i bought a power-one PSU that says it will put out 204W max output, or something like 4.3A. by my math, these modules will only a...

thanks for the help, folks. FYI, the TLE2071's seem to work as drop-in replacements; no oscillations or issues im noticing so far.

ok, thanks for the help. unfortunately, i already ordered enough TLE2071's to rechip all the channels. if dropped-in, what would be the result? i understand, the board isnt going to magically turn into "pro level", that's fine with me. my intent is to find a nice happy medium between downtime on the...