Search found 68 matches
- Tue Jan 13, 2015 5:47 pm
- Forum: Creative Recording
- Topic: FT: CAPI 1/2" Aluminum Pointer Knob x 8 - 1/4" Sha
- Replies: 0
- Views: 961
FT: CAPI 1/2" Aluminum Pointer Knob x 8 - 1/4" Sha
Hey folks, I've got some extra CAPI 1/2" aluminum pointer knobs that are made for 1/4" shaft pots. I have a project coming up that will call for the same style knobs, but with the 1/8" shaft. If there's anybody out there with four 1/8" shaft CAPI knobs that they're not using, but could use the 1/4" ...
- Mon Dec 29, 2014 9:00 am
- Forum: Creative Recording
- Topic: Anybody using Lola preamps on their master bus?
- Replies: 2
- Views: 1422
I wish
The Creamliner does look really awesome, but it's pretty far out of my ballpark. I build my own, so either Lolas or VP28s are gonna rum closer to $700.
- Sat Dec 27, 2014 12:25 pm
- Forum: Creative Recording
- Topic: HPF caps in DBX 166
- Replies: 9
- Views: 2670
fair enough
Well, with that last note in mind, I went ahead and looked for other ways to upgrade the circuit. I pulled the LF353 opamps that were on the input and swapped them for some OPA2134s that I found in my box of ICs. That seems to have helped with clarity in the top end. I figured that it didn't make mu...
- Tue Dec 23, 2014 3:15 pm
- Forum: Creative Recording
- Topic: Anybody using Lola preamps on their master bus?
- Replies: 2
- Views: 1422
Anybody using Lola preamps on their master bus?
Hey Folks, So, I'm trying to decide between CAPI VP28s and Hairball Audio Lolas, for my next purchase. Currently, I'm really interested in all the clips, etc, that I've heard from the Lolas, but I am looking for a pair of modules that I could also run my master bus through, for analog warmth. Folks ...
- Tue Dec 23, 2014 2:31 pm
- Forum: Creative Recording
- Topic: HPF caps in DBX 166
- Replies: 9
- Views: 2670
That seems a little low, per above
So, earlier comments mentioned that this filter is usually set up around 100k. If that's the case, it does seem possible to open the top end(at R12/C14), some, but oscillations would be a concern. I found that schematic, before, but I really couldn't make out much of anything, either. Thanks for loo...
- Mon Dec 22, 2014 1:08 pm
- Forum: Creative Recording
- Topic: HPF caps in DBX 166
- Replies: 9
- Views: 2670
Thanks a ton!
Sounds like I've got some homework! Thanks for all of the info. I don't have the level of test equipment that you mention. So, I'll locate the caps and do the math that you mentioned, to find where it's starting the filtering.
glenn
glenn
- Sat Dec 20, 2014 5:12 pm
- Forum: Creative Recording
- Topic: HPF caps in DBX 166
- Replies: 9
- Views: 2670
oops
You're right LPF. It's got plenty of bass, and I wouldn't want to mess with that. I don't have a scope, so this may be a step too far. It's sounding good, with the new chips and PSU upgrade.
- Sat Dec 20, 2014 12:28 pm
- Forum: Creative Recording
- Topic: HPF caps in DBX 166
- Replies: 9
- Views: 2670
HPF caps in DBX 166
Hey there! So, I've gone ahead and swapped the VCAs for THAT corp chips and replaced the 5534s with the LME49710 opamps(as usually seem to be recommended). I also bumped up the power filtering caps to 1000uf and put in all new electrolytics, while I was in there. The only other mod that I'd like to ...
- Sat Aug 09, 2014 9:06 am
- Forum: Buy/Sell/Trade
- Topic: WTB: Lindell 6 space 500 rack - $250 shipped
- Replies: 1
- Views: 921
found used one on ebay
found one for $260(shipped) via alto on ebay. I figured the ten extra wasn't gonna break the bank,
- Thu Aug 07, 2014 10:40 am
- Forum: Buy/Sell/Trade
- Topic: WTB: Lindell 6 space 500 rack - $250 shipped
- Replies: 1
- Views: 921
WTB: Lindell 6 space 500 rack - $250 shipped
Hey there, I'm looking to get into the 500 series world, and I don't want to get a two or three space rack that I would quickly outgrow. Unfortunately, I don't have the money for a new 6 space rack, but I see the Lindell ones are pretty affordable, even new. Figured I'd see if there was one floating...
- Thu May 08, 2014 10:09 am
- Forum: Creative Recording
- Topic: Tube rewiring (pentode to triode, etc) questions
- Replies: 10
- Views: 5172
makes sense
So, that pretty much makes sense, to me. I'm actually going to get another one of these mics, to be my "tube rewiring guinea pig" mic. I like the two I've already modded, and don't want to risk that money/work I've got into those. When I get the new one, I'm going to try both of these rewiring exper...
- Tue May 06, 2014 6:42 pm
- Forum: Creative Recording
- Topic: Tube rewiring (pentode to triode, etc) questions
- Replies: 10
- Views: 5172
well, i haven't done anything, yet
I haven't done anything yet, since I'm still trying to "pre-game" this mod, via here and my head. When folks on the TOMB tell me to be careful, I try and take the advice :D . The mic I'm looking to try this in is the Nady 1050, which is one of the alctron tube mics, with the 9 patterns, switchable o...
- Tue May 06, 2014 7:11 am
- Forum: Creative Recording
- Topic: Tube rewiring (pentode to triode, etc) questions
- Replies: 10
- Views: 5172
Cheers, again!
So, if the rest of the circuit is wired for the pentode circuit(and since this particular mic has a tube socket that is connected by wires, instead of PCB mounted), it seems that all that would be needed to be done is clipping off the wire going to g2, at the board, and use that wire to jumper over ...
- Mon May 05, 2014 9:23 pm
- Forum: Creative Recording
- Topic: Tube rewiring (pentode to triode, etc) questions
- Replies: 10
- Views: 5172
Cheers Guys
So, If I'm reading this correctly, I would be connecting pin 1 to pin 6 and pin 8 to pin 4, to make the conversion, in the case of an EF86, which seems to be the most popular tube to use, in these Alctron Chinese condenser mods. Can that be done by simply jumpering, between the solder points, coming...
- Mon May 05, 2014 7:04 am
- Forum: Creative Recording
- Topic: Tube rewiring (pentode to triode, etc) questions
- Replies: 10
- Views: 5172
pin out on triode vs pentode
So, it seems that the only pin that I see going to something that doesn't seem to be in the triode tube schematic(if I'm reading this right), is that pin three seems to be going to something identified as K, which doesn't appear in the triode's schematic. Don't know if that's part of the equation, o...