Message Board

Skyline Studios on 34th street. Neve VR 60, great amps, great live room, Protoold HD3 Accel w/G5 dual processor.


Nile Rodgers old digs.

here's a great webpage for those who want/need more info on hammonds (please forgive if this link has been posted before)

http://theatreorgans.com/hammond/faq/

found it whilst looking for a leslie 147 for a friend of mine

........There are plenty of people who don't know a multi-track recorder from a hole in the ground. Sad but true......but yet there are still CDs being made. Yet these same people can practice, read books and forums like this, go to adult learning centers or schools that offer training in ProTools ...

dynomike wrote:
And you just joined the board 3 months ago? Impossible.

oh puhleez

I'm not sure if Radio Shack still makes them...but Crown does. PZMs are great as a 2nd mic inside the bass drum, just place it right on top of the pillow, you might need to reverse the phase.. and if the drummer's beater is felt or soft sounding & you want a little click in the attack...just combin...

...I've also used a $49 chinese no-name mic combined with a Radio Shack PZM thrown in just for the hell of it....both ways sounded great in their own way, there is'nt only one way or one mic. Man i haven't used a pzm on kick's in years!!!!!!! Great altenative I haven't thought of for a long time......

I like the d112...but I like D12E better..... and alot of people here would probably say get a D112 or D12

However, try the audix d6, senn 421, EV re 20, senn e602, shure pg52 or ksm52, nuemann fet 47, shure sm 57, audio technica am 25 to name a few others.......

I have also tried m-s on overheads and wasn't too thrilled with the results in the overhead position. the ortf method (2 mic's spaced 17cm apart angled at 110 degrees) and what Chris had just described has yeilded very good results for me. You might also want to try with the x-y config is changing t...

I tried selling a Sony PCM3348 about three years ago on digibid with a starting price of $15k (the studio bought it for $180k 3 years before that :!: ) and nobody bid on it. Consoles may have a better chance at being sold.........does anyone know if Daniel Lanios sold his Vintage Neve? It was listed...

....maybe it'll come back in popularity like the manufacture of tube mics.............then again......

Well, That Desiccant -I think that?s spelled correctly, the Do Not eat thing does produce a corrosive liquid. If you live in an area with low to moderate humidity it may be OK and even good. In high humidity it?s really necessary. But the irony ? In really high humidity it absorbs so much water tha...

hey I've had a vintage u47 come to me in a tupperware container! My personal preference is to put it away if it isn't used for a length of time. This lowers the chance of someone stealing it! (Worked at a studio where we had 3 u87's stolen in about 2 years time) As far as the moister absorbers, I'd ...

Where I used to work here in NYC we always sent our SV-3700's and our SV-3800's to Pro Digital in Pennsylvania http://www.prodigitalinc.com/ I dont think we ever sent it to anyone here in the city. ..........and boy they always needed to be serviced!!! We had about 12 to 16 machines total and at lea...

For me , it is a no brainer. Mix it to 1/2 inch and master from 1/2 inch, however definitely mix it back into protools or another hi-res format like the alesis masterlink at 24bit/96kHz as a back-up . It may cost a little more but I think it is worth it in the long run. I recently attended a masteri...

Yet again they could still be up because business has gotten better for everyone since Unique went under. The only downside is everyone expects their Unique Rates... ........a little better at that...........not much, but a little..................and those who have been expecting to get Unique rat...