Message Board

The RedEye sounds like a great tool for guitar tracking, I will ad it to my growing list of things to purchase. The re-amping worked out rather well, I went from the aux. out right to the amp. The Aux. send level knob helped me control the signal to the amp. Hopefully next time I will either have a ...

I recorded a guitar track w/ an amp, now I would like to run it through a differant amp and mic it again. Can i go right from the board to an amp?

I know i should have recorded a seperate track w/ a direct box, however i did not.

I need some verb and delay for my first project w/ a tsr-8. I have a nanoverb that I used on my 4 track stuff. (must be a cheap processor cause it sounds like shit to me now) I would like a user friendly type thing that I can figure out w/ out having to read the manual 3 or 4 times. Used would be gr...

Checked out the problem a little more, I can eliminate the compressor.
must be in the wiring or board itself. I used short insturment cables to patch in the comp. maybe I need to have a balanced cable from the comp. to the boards input? (berringer 20 ch)

Kick becomes small & thin sounding.

swingdoc, the routing should be o.k. tsr8 to ch1 on mixer ch1 aux out to 266xl compressor in comp. out to ch2 when the signal on ch2 is brought up it's out of phase w/ ch1, that is the problem.It's driving me crazy this project needs to mix the drums down before the rest are tracked. I figured rever...

Swingdoc & bignerd I am trying to split the signal, like 1ch. kick 2nd ch. compressed kick.

I have a TSR8 going into a berringer 20ch. mixer. Aux out to a DBX 266XL Comp. back into it's own channel. It is out of phase w/ the original track. I switched the leads on one end of a shielded cable thinking that would reverse the phase... Nothing no sound what so ever. I even tried the same thing...

Thanx everybody, this helps alot. It's easy to forget wich way to turn the nut when you have little experiance w/ truss rod adjustment.

This is not an expensive bass and I do like the TV repairman bit.

Is there a link out there to help me w/ truss rod adjustments?
Like what direction does what. I have a friend who has a slightly bowed or warped neck on a bass. I think it's fixable.

I recorded 2 bass tracks, a D112 on 4-10's & a sansamp.There are some phase issues I did not anticipate. I was told to delay the direct track ever so slightly. How do I set a nanoverb (set on dely) so that I only hear the delayed sound.