Message Board

might endup my way...

I definitely never hit save the one number higher naming convention is great, good call on mentioning that one noeqplease. One more tip, if once you start using the naming convention apply whatever number you use on your session file to your bounces, that way your bounces are tied to a session, make...

Your situation is perfectly repairable. When you processed the audio it made new regions with an additional suffix in the name kick_01 turned into kick_01-eq. If i were in your situation i would do a search of my audio file folder for kick_01-eq, switch the view to date modified and make note of the...

Um Hopefully you can solder. Make mults and use them. Not everything has to be on the bay MrPatchbay rules http://home.flash.net/~motodata/patchbays/ 1/4 tends to be more cost effective than tt but space may be at a premium . Make sure your not degrading your sound with some super budget bay, your b...

yep that's what i used

I print because with SOME plugs I feel like when i open and close the session things aren't delayed buy the same amount in the same places each time; printing and removing the plugs sort of locks them in place. But you are right about just moving the audio around that works plenty often.

I doubt you will really be doing much decoupling so why dont you just LIGHTLY stuff those holes full and then glue window flashing in strips like patches over the holes. you will get probably as much mileage, as the other stuff, and the flexible materials will be a lot easier to use than the shitroc...

Looks great!! I am ironing out all of the small details on my build now.
My Studio Build
A great forum which Im sure you have already heard of but if you haven't....
A copy of John l. Sayers' book is a great idea as well.
Many great adventures are ahead.

Who did you loose?

Im giving these answers on the guess that your using PTLE since I don't usually have these problems with HD 1: Copy & Paste: All the automation getting transferred is the normal state when you copy a region it take all info associated even plug in automation. For plug in automation though the trick ...

I have an all mouser bom for the 603 if you would like. I have not gotten to the 2001 yet but Im sure I will soon. I found one solution for the buzz, I noticed the 2001 schematic that the ground should be tied to the lug of the output xlr. I soldered the ground to said lug and no more noise. 8) Than...

Just fired it up this morning and everything appears to be working. I need to hunt down a low level hum. Any pointers on where to look would be great.

Thanks guys!

This makes it seem like i am supposed to connect 7, E, 6, and 5 all together
does that seem right? Or, could it be 7 to 5, and E tied to 6 get feed by the output of R5

Anyone with some help on that lundhal issue?