Message Board

COntact me @ mb@nanometer.com about mixing

Later
Buzz

PS: well talk about cost

Try re-amping the signal , then compress it again in that re-amp stage ( you will get lot's O color and lot's O compression ) you can even try a different mic for the re-amping for color as well , set the compressor to shit loads both times

LAter
Buzz

Back in the good ol' 80's we used to stay up for days on coke recording such classics as 1. I can;t dance with you cause my dog aint got no wheels 2. Les be les be lesbians 3. Fly surgeon 4. Give me a blaster so I can get to sleep faster ETC. we also took some old Lemon systers tapes ad added our ow...

Hey guys being somewhat of an expert in the optical area here are a few tips/info 1. Toslink is plastic fiber 2. most toslink cables are cleaved/cut using a hot knife ( leaves a very bad finish ) and have hi loss 3. lower loss will give you a further distance the signal can travel before hitting the...

Are your strings hitting your pickups ?????????????????????????????????????????? this will cause this problem in a big way , or you have overcopressed the bass so much at the amp that it's breathing hard ( less likely

Later
Buzz

Gregoirio run it under water that makes then really drip !!!!

try loosening up the springs the tighter the spring the less reverb time there is as well as changing the sound to a tight reverb sound ( the old plate reverbs used a knob to change the spring tension and plate pads

Later
Buzz

With a 24 bit system the last bit is taken up in the last 6dbfs in other words if your within -6dbfs you are using all the bits available
in different systems the input pre's maybe causing the issue of differnt sounding record levels ????

Later
\Buzz

The Um70 uses the same module/capsule as the U87 these are great mics from what I've heard use it for vocs etc. I've been looking for 1 recently but no luck I have a u691 which also uses the m70 casule and it sounds great

Later
Buzz

SO ???? , any body have an opionion on this deck ??? I'm going to use it for mastering to tape to smooth out the digital system I'm using.
I read already about the pin 3 hot on the other thread

Thanks
Buzz

Anybody know much about these decks I know they have been used quite a bit by several studios , I found one for sale but need more info ????
How about servicing???

Later
Buzz

Mike the 7 contacts are probably insert contacts ( when a connector is inserted this breaks the connection ) used for normalling the patch bay function (the connections will be parrallel , yuo can wire the bay for either setup if using it for channel inserts you want it normalled , if using it for f...

IT sounds like a grounding problem or a bad guitar cord !!!! change the guitar cord , also if your gain is way up there any external noise will be amplified .
switch the ground polarity switch on the back of the amp ( if it has one )

LAter
Buzz

The sonic maximizer does do some syncing of freqencies but mainly it adds harmonics the source ( it increases the amount of harmonics ) the freq it does this at is controlled by the tone knob ?? (freq control knob forgot the name ) These have been used in mastering tracks to open up the sound so to ...

CLean the heads and get brand new tape you may also0 need to open it up and get some tuner cleaner and clean the input pots , after units sit for a while they get dusted up and these things will happen

Later
Buzz

Has anyone compared the 2480 to other decks Mackie,yamaha,Tascam ,etc. ???
What do you think of the 2480 vs these other machines ( mainly sound quality )

Thanks
Buzz