Message Board

Find a Groove Tubes MD1A. The more I use mine, the more I love it. $500. Rules. Totally. After wanting one of these for like 18 years, Recycled Brains tipped me off on one going for dirt cheap on Reverb. I'll normally just do all the vocals with a SM7b. But the last record that I tracked out of my ...

Dammit Ryan.

This has been sold.

Both mics are in excellent shape. I'm the original owner of the 602; it's in like new shape. I'm ATM25 for life. MD1a was purchased used, cleaned up, and used on many a guitar amp and FOK position since. Both are in great shape functionally and cosmetically and include the expected additional items...

You’ll have to put jumper wires in to replace the cut traces. You can carefully scrape off the solder mask(the green, typically) over the traces to expose the copper to solder to, or put wires from components along the trace( in the case from the switch pins to the next solderable point on the trac...

trodden wrote: ↑

Thu Dec 07, 2017 8:06 pm

Gonna snip some wires and see if it sets it to be like the "normal" one with the "ST" button.

Well that didn't work. Noticed while I was snipping away, the mod done to this module called for breaking some of the traces, hence the "scratch marks"

My question is what happens on the non working module? When routed to 1, if you pan hard right, do you get no signal, or does it have no effect? Hopefully you see where I’m leading with this, you need to factor the pan circuit into your thought process Alright. Ran some signal through the weird mod...

Two things. One, you need to trace down what pins the stereo signal is sent to on the working module, so you know where you are missing signal. Secondly, the working module has a pan defeat switch, which the non working module does not. My question is what happens on the non working module? When ro...

That's the thing. They're both identical besides the buss routing, on the board, everywhere. They are both BC1118/4's which are Stereo Input Modules. So the only difference then, is the buttons. I'd try to get new buttons then, and forget about making too much of a headache. Cheers Sorry, I must no...

fuuuuuuuuck... That figure 8 oktava set up is awesome. I wish...

That's the thing. They're both identical besides the buss routing, on the board, everywhere. They are both BC1118/4's which are Stereo Input Modules.

Also interested in this as well.

Hello. In the process of refurbishing an AMEK BC2. I want to add more channels for mix down, so I purchased a handful of BC 1118/4's. One of them I popped into frame and good to go. However, the other three have a different buss routing option. While the modules that came with my console and the one...

I'm good on BC1118/4's now.

Still looking for either a pair of BC1126's or a single BC1125/4

I have a pair of BC1115/4's and a pair of BC1137/4's for trade or for sale.

Hello. Recently purchased an AMEK BC2 in rather nice condition. I'm looking to trade out some of the modules that it came with so I can have more inputs on mix down. I'm looking for two to four BC1118/4's as well as two BC1126/4's or a single BC1125/4. I can also offer two BC1115/4's and two BC1137/...