Message Board

Remove the pitch control knob.There is a threaded sleeve behind the knob,Unscrew it.There are also three screws on the front bottom that have to be removed. If the reels are rubbing on the faceplate,you need to reset the reel table height.You don't need to remove the front panel.Remove the "bonnet" ...

So because of an article in Tape Op,1:1 Xformers prices will now go through the roof.

Anyone out there have any real world info/experience using a i5 driven laptop with soft-synths ,(Reason, B4,),live.Not DJ or dance, but real screaming B3 sounds, pianos - Ya know rock and roll.Last time I tried there was still too much latency,especially on B3 smears.

Went on a field service call 10+ years ago @ a home pro studio in a condo.Client had a $3000 first generation CD burner wired to a mixer.He had a loud 60Hz. on the CR out.I was standing between the mixer and the burner,put my hand on the burner to balance, leaned over behind the mixer,touched it wit...

Measure the voltage between neutral and ground.There should be no difference.I had a problem with the neutral feeding the house.I measured as high as 150v,depending on what was turned on,and was getting a low level shock in the bathtub because the ground at the breakers was tied to the drain pipe on...

bump

Hi all,I have a new out of box,never used,Tascam Sx-1SE.It is the model with all the options,including a removable SCSi drive bay,with an extra removable drive assy.I also have all the original double box packing matl.and owner's manuals. I am the original owner,just can't finish the studio-Moms com...

Clean the tape path.

Maybe his name should be Sonic Sturgeon,I smell something fishy!

Some consoles,(including Tascam),use 9 V.A.C. to drive the VU meter bulbs.I would think you would need a diode along with the current limiting resistor?

Yeah,I used a 122 for the test.

Hi All.Anyone using or have tried to use a netbook,(Atom CPU),live with B4 or other softsynths?I tried B4 on a cheap netbook and it seems like there was too much latency when it was played with a midi controller.

Hi All.Looking for a schematic for a UMI buzztone/volume expander.Anyone have a link?

The Fs signal has it's own shield. The data lines are also individually shielded to prevent crosstalk and jitter.That's why ribbon cables don't work in long runs.Also with critical listening,you can tell,(subjectively),the difference between proper TDIF cables and ribbon cable versions

You gotta' point there Larry.Not disrespecting the old farts-because I'm one