Message Board

Hey everybody, I've got a box of approximately 80 clear jewel cases (looks like 3 are cracked from the original shipping coming from American Digital, but the rest are perfect) and probably close to 100 inserts and about 50 liners (all Neato) to go with them. All leftover from a completed project. I...

Bump just to say that since shipping is so expensive, and I really need the space, the absorbers/traps are free to anyone willing to pay the cost of shipping and Paypal fees for the payment of the shipping. Shipping and fees come out to just about $160 which would cover the 2 4" traps, and up to 3 (...

Hey AE,
I'll let you know ASAP. I'll try to get a fairly accurate weight of them tomorrow and get you an estimate.

*updated the list to include monitor stands*

-Darrill

Hey everybody, I can't afford the space that some of these things are taking up. *The patch bay is a TEAC PB-64, 64 point RCA patch bay. It is identical to this one: http://cgi.ebay.com/Vintage-PB-64-Teac-64ch-RCA-Audio-Patch-Panel-Bay_W0QQitemZ220308961267QQihZ012QQcategoryZ67814QQssPageNameZWDVWQQ...

Hello, While I know it is a long shot, I feel compelled to give it a try. I sold a Farfisa Microrgan to someone here a few years back and wanted to see if that person had any interest in selling it back. I have no recollection of who it went to, only that I'm fairly sure it went to someone in New Yo...

Bump.
$275 shipped.

-Darrill

Hey everybody, I'm selling my Sennheiser MD-421 II. I purchased it new just about a little under 2 years ago. Comes with foam lined hard case, manual, warranty card/manual, a sheet titled "notes on connecting this microphone using a right-angle plug", and the factory, computer plotted frequency resp...

Called EHX they said to run XLR>XLR straight out of the Tascam into the 12AY7. Turn the gain on the Tascam down and let the 12AY7's pre do all the work. Turning the gain on the 12AY7 up so the orange overload light just twinkles is +4. Also they said the 1/4 output on the 12AY7 is not a bypass its ...

When he is referring to converters in that reply, he is referring to the physical piece of equipment, in that case, the Delta 1010. The converter is what is *converting the current from your microphone, or signal from your preamp into a digital signal. In your case, your converter would be the DP01-...

I opened it up and there is a trim knob inside I turned it down but it didnt seem to do anything. Anybody know how to get rid of this hum? ldm311 are you still there? Hey jckinnick, My thoughts are along the lines of most of the other comments so far. It really sounds like a problem with your signa...

I opened it up and there is a trim knob inside I turned it down but it didnt seem to do anything. Anybody know how to get rid of this hum? ldm311 are you still there? Hey jckinnick, My thoughts are along the lines of most of the other comments so far. It really sounds like a problem with your signa...

Sorry for the second post, but I wanted to keep it separate from the previous...

Could you explain, in detail, your signal path from microphone to your monitors? This might help someone pickup on something funky that could be the culprit.

-Darrill

I thought you had it working like a page back? I did but then I bought some longer cables so I could keep it hooked all the time. And now its back to humming. Hey jckinnick, Have you checked to be sure the cables you bought were properly balanced? I know it seems obvious, but maybe one of the groun...

segaface wrote:Just wanted to say that the Hill Multimix I bought from Darrill arrived quickly and well packed. A++ seller, folks.


Andy

Thanks Andy!

-Darrill

bump