Message Board

Some of the switches are a bit dodgy, are tehy easy to replace?
Should I replace caps?
Anything else that can be done to it apart fron scrapping it
http://pics.studiorepair.de/misc/Vesta_ ... index.html
Thanks
Paul

Does anyone know anything about it?
Thanks
Paul

Thanks
PAul

Does anybody know anything about it
Is it good, bad, cool if its cheap
Thanks
Paul

Hey man, thanks for that
I turned on my mixer this morning amnd the channels are fine now
THanks
Paul

I accidentally sent 2 of my channels extreme audio levels and now theyre distorted at all levels
What have i damaged?
Thanks
Paul

My mixer is a Soundcraft Foilio F1

Hey the scum
I kept them and just ran new wire through em
thanks
paul

Cool, thanks for that man
Paul

Hi, Ive just started volunteering at Percy community center, Bath. We teach children between the ages of 13-17 to make digital music. There are 7 x M-Audio Oxygen 8 V2 keyboards. Unfortunately 2 of these have been broken. I managed to fix one with some duct tape but the other as you can see from the...

Hi, can you tell from the pics what kind of compressor this is and what it would be good for ?
http://pics.studiorepair.de/misc/Vesta_ ... index.html
Thanks
Paul

Hi, i have seem to have lost the left hand signal on my mixer
Nothing is reading when i pan to the left
edit: There is a signal but very faint
I know it is all one board and not modular, but is there anything i can try?
The PFL is working on the left channel though
Thanks
Paul

hey nclayton yes i have just recieved resistors but havent tried em yet the scum when you posted questio i was unsure whether you were enquiring about the 2 different channels or two output channels(meaning the direct out and the insert) thats where the confusion was as of noise on noisy channels so...

hi the scum yes the noise is the same on both channels, meaning direct out and insert send and return I can use my oscilloscope to see the noise, but I dont understand how that benefits me when my earpiece can hear the noise anyway What is it that i should be seeing that makes the scope so beneficia...

hey the scum
im monitoring either off the direct out or various places on the circuit with a crystal earpiece
the resistors are really small, probably about a 1/2 or 1/3 the size of normal ones
hope this helps
paul

hey suppositron
thanks for that, i really appreciate it
right now, im just monitoring off each board individually
so there is no summing going on
but maybe the switches are a problem
it might just be easier to buy a few new ones and change em out to see if that does the trick
thanks again
paul