Message Board

Here are a few details as I know them, from having spent the week before the TOC helping Craig get ready; I got to be one of those annoying Nextel wearers whose phone would go off at an inappropriate moment and then hustle out of the room to deal with some damned thing or another. I agree with Joel ...

We'll do the post-conference recap out there, Brad. I'll bring my Speedo.

Frank

Tomorrow at 5 at The Thin Man, 2015 E 17th. I'll be the one in the New Orleans Saints hat, drinking an Abita Amber.

Frank

How 'bout next Saturday, 2 June at 5? I may end up out of town this weekend.

Frank

Who's in? How about this Saturday the 26th at The Thin Man in Denver? We could do it June 2nd, too. Let's hear from ya.

Frank

"We'll get it right if it takes every penny you have..."

At least according to this:

www.born-today.com

Nice sweater, eh?

Anyone have experience with running cooling fans for a computer iso cabinet w/ lower than rated voltage (so they'll run slower and quieter)? I added a rack-mount 4-fan unit to our iso cabinet, and in an effort to quiet it down, tried using a 9-volt transformer instead of the supplied 12-volt unit, w...

17 May, on Nonesuch. I've had it running since last night when I posted the previous note, and I'm not as knocked over as I was w/ YHF or Ghost, but sometimes things take a bit of time to reveal themselves, auralman. Or maybe it's just not that good; I'm not sure yet. Seems like Nels has a few cool ...

burn Two advantages to building a flat ceiling in your case; Easier on the budget, and (to me, anyway) easier to predict the modal behavior. You can treat funny modes caused by bad dimensions much easier if you can calculate what they are, and ANY kind of out of square walls make this nearly impossi...

It's here:

http://wilcoworld.net/sbs/

Are you sure you're not getting affected by the room? Seems odd that speakers as good as the ATC's would have that problem.

Bryston makes crossovers, though I've not used them:

www.bryston.ca/crossel.html

Frank

Kevin's suggestion is probably the least expensive way; buy a solid core slab door and get a trim carpenter to cut out the center and build a frame and stops to hold the glass. Depending on how exposed it'll be to the weather, you might try to DIY it, if you have some tools. Glass thickness should b...

Any out-of-towners still around (J)? I've had family commitments the last couple of days, but an after-work adult beverage would still work. I'll check in at lunchtime.

Frank

Flaming Lips website says OK's finest will be on the Oklahoma Centennial float this morning around 9 am PST. Check your local listings.

www.flaminglips.com

Frank