Message Board

There is a 32 channel M2600mkII a few hours away, same money as the Spirit Studio, but man, 32 channels is about DOUBLE the size/channels we were looking for. Needs to be able to be moved around as needed - not "portable" per se, but at least "moveable". . . Actually, the footprint is not that big....

If you can find a 16 channel Tascam M-2600 it'll be good. has tons of usable routing features..

Not considered " top of the line" by many, but the Tascam M-2600 MkII console have some of the best routing feature than most/many modern consoles, and it's an inline console. ( meaning it has two separate inputs per channel. One input for live sources and the second input to monitor the returns fro...

Hello. Question if I may: Will using a set of 2 way bi-amped active monitors ( 140 watts or so ea.) with 8" drivers be considered too big to use in a room with the dimensions of 12' (w) x 11' 1/2 (h) x 20' (L)..?..Or would I fair better with 6" or less..? Thanks..BTW, the room is treated..

I've never been in one personally, but the users manual has better tech docs than a lot of gear: http://www.hafler.com/techsupport/pdf/MAN1461C_P1500_P3000_man.pdf There's a schematic, parts list and theory of operation. A better foundation for troubleshooting than I was expecting to find. Hey Scum...

Looking for a cheap fanless power amp to drive my NS-10s until I can get my Hafler repaired..

I think I posted this in the wrong place over there..Anyway, my Hafler P-3000 quit working and I was wondering if anyone here ever worked on/repaired these Hafler amps? If so, and you are interested in taking a look a mine, give me a PM and we can talk further..Thank..!

Hello..My Hafler P-3000 took a nose dive on me. ..Anyone here worked on/repair these Hafler amps? If so, would you give me a PM if you may be interested in taking a look at mine.Thanks.!

Have a friend that uses one in his studio..Sounds ok..Just my opinion, the converters are a little " hazy'..Reminds me of the Digimax Lt converters which is why I had mine ( Digimax) modded ( when I was using it as the converters sounded " hazy"..Good luck

SOT..Do this mod need to change the capsule as well as components..? anyone have a clip of this mic after mods in action..? Thanks..

So, the R8 showed up way earlier than I expected. The guy included 3 reels of Ampex 457. So, I finally hooked it up to my Ashly m508 and threaded the tape and it sounded like total ass. It took me a while to dial in a mix that was passable (7 channels of drum kit). And then I started hearing "squee...

I used an Ebtech 8 channel level shifter with my R-8 for a while..It worked really well ( even though it involved patching and repatching.. :wink: )..I'd use the Ebtech to track to the R-8 from my external mic pres/compressors ( +4 outputs which would've been to hot without the Ebtech). Then I'd rep...

Just updating this...