Message Board

I love my Pro Jr. Simple 15 watt all tube circuit with a few fixable flaws. I added a Weber Vintage speaker and JJ tubes and couldn't be happier.

i think this would sound good for something i'm currently working on. can i track and mix the drum tracks on my pc and then send them to cassette and somehow back into the pc? will i get common cassette characteristics like that naturally compressed, phasey sound?

kayagum wrote:A brand new HP Slimline PC (Athlon 64 x2 3800+) for $350!!!!

It should be a little faster than my PIII generation Celeron.....

mind telling me where from?

I recently picked up a Sunn Concert Bass amp and 15" cab. It sounds awesome, for the money I'm really excited about it. The only concern is the amp is 150w and the cab is 100w. How hard will I have to push the speaker to really blow it? Next question. I want to add another cabinet to the equation an...

Could I use my Sansamp to do this if I turned the "blend" knob all the way down and used none of its sound?

now that i actually have a decent microphone to record bass with, i'd like to compare it with the DI signal. is there a correct way to go about recording the bass players DI and amp at the same time? a little splitter box perhaps?

makes sense. my guess is that i could be safe running the 100 watt bass speaker along with 4 35 watt guitar speakers (140 watts). that's 90 watts of headroom.

I appreciate the response.

I could always put bass speakers in the 4x12 cabinet too. Any recommendations on 12" bass speakers?

i recently acquired an old solid state 150 watt bass head. my 15" bass cab is rated at 100 watts. to be safe (and to be LOUDERRRR) i'm going to run that cab along with a 4 by 12" cab. the 12" speakers are guitar speakers rated at 35 watts each. now for the kicker. can i do this without blowing the g...

build your own!

If for whatever reason this mic is lacking in any department, I might have it modded. However, I think I really just want that cheap ribbon sound...no matter how flawed people think it is. It adds character .

thanks for the recommendations! i ended up ordering a nady rsm-1 and not a modded one. i think i want that cheap ribbon sound, a little trashy and thick sounding.

I'm searching for a budget ribbon mic (or even a pair) to use for roomy drum sounds and to compliment my 57 on guitar cab mic'ing. So far I've looked at the Shinybox with Lundahl upgrade, the Cascade Fat Head II with Lundahl, Beyer M260, and an Apex 205 with Mike Joly's modifications. They are all r...

I might have a pair in a day or so. I just need to verify if the pair I just bought are really happening. If so, I'd need to sell my oktavas. I'll let you know in a few days. Mine are real russians...as best I can tell from looking at the oktava site and speaking to michael joly. I was about to sen...

I'm searching for a pair of Oktava MK012's, hopefully the real Russian ones. I don't care what capsules you have for them.

Let me know, as I'm willing to buy now!