Message Board

My LCR2400 is mounted right below my preamps in my studio and I can't hear it sitting at my desk. Just for fun, I put my SPL meter 1ft away right in front of it, and it wouldn't register at all, so less than 50dB @ 1ft. The case fans in my DAW are louder, about 5 ft away, and I have those expensive ...

Still got it. I'd trade for a reverb pedal if you've got one.

Here's a shot of the back from the MCM website: http://www.mcmelectronics.com/product/MCM-CUSTOM-AUDIO-50-7774---TC-7510-/50-7774 http://www.mcmelectronics.com/content/productimages/s4/50-7774_2.jpg RCA SPDIF and optical TOSLINK inputs. There's no clock slave input. It slaves off the digital input s...

http://i50.tinypic.com/rkwpbd.jpg Bought it from somebody here a few years ago. I need to clear out some rack space though, so here it is. Everything works as it should. Internal battery NOT leaking (which was common in a lot of these). Some rack rash and minor bends on the ears, but it mounts fine...

Bumpin' it up. Make me an offer. I'll probably take it. Not really looking for trades at the moment, unless you have a 1/4" 15ips NAB MRL tape you'd like to get rid of.

https://lh5.googleusercontent.com/-RegIOBkdakM/UU5WKy2QBvI/AAAAAAAABQQ/99iPNwX6zBY/s1055/IMG_20130323_192528.jpg This is the famous $79 (now $99) converter recommended by Jim Williams a few years ago. Same as the Beresford TC-7510, just different labeling. The PCB inside even says TC-7510. Here's t...

You've seen this, right?

Zed R16 Firewire ground fix

Very simple repair. Might not fix your issue, but it's probably worth a try.

I bought a factory refurbished R16 about two months ago and it's been rock-solid for me.

sent you a PM

You want cables made like diagram number 14 on this page: http://www.rane.com/note110.html

Allen & Heath ZED R16

and some drum heads.

Steel wool on chrome will scratch it. Use one of those 3M green synthetic scrubber pads instead. BarKeeper's Friend works well for soaking rusted/dirty metal. Available at pretty much any grocery store. As for lubrication, I like "dry lube" which is teflon suspended in an aerosol spray. The liquid d...

FWIW, the pm1k input transformers are not 600:600 ohm. They're more like 150:10k (or something like that) mic input transformers, and will probably saturate with a line level input.

SOLD

It's up on ebay, but I'll pull it if somebody here wants to make me an offer on it. I'm moving in about 10 days and I need it out of here before then.

The Scum wrote:http://denver.craigslist.org/msg/3458173594.html

Have fun replacing light bulbs.

The coke mirror is already installed though, so that kinda makes up for it.