Message Board

I have several for vintage guitar amps, pedals, etc... any for classic/vintage recording gear such as mics, preamps, compressors, maybe consoles? Any including info a bonus. Thanks!

The Scum wrote:Did the connector that leads from the Aux master PCB to the output jacks come loose?

...Yes.

Thanks guys. Scrum, I don't think the connector came off... I just put it back in after taking it out a few times to figure out setting the jumpers and was careful. It's a new mixer to me so I'm still figuring it out. Jim, I will pull it again and check the resistors and report back. I have to pull ...

OK, sorry for the delayed response... been so backed up with work. Anyhow, if I press the "AFL" (After Fade Listen), I can hear any track I turn the corresponding AUX volume up on just as I would expect. However, the "AFL" allows you to listen through your monitors... it doesn't do anything at the A...

Hello, I feel silly for not being able to figure this out myself... While tracking on my new Souncraft 600 mixer, I am trying to use Aux output #1 to feed my headphone amp. I am turning up the Aux #1 volume on each channel strip for each track that I want to be heard in the headphone amp. I am also ...

Where's the "Like" button??

Wow, those knobs at FullCompass are close but they only have yellow. Will try Frank at Soundcraft Northridge. Thanks so much! If anyone reading this now or in the future has some to sell, please let me know!!

Hey! I just got a Soundcraft 600 and a few of the knobs are missing. Does anyone have any they might be able to sell? I may consider buying a channel strip or bus strip as spares if you have any.

Thanks!

Scodiddly wrote:And LEDs are instant on/off, so they'd definitely act like strobes.

Use a cap across them?

Best advice is, only do one thing at a time unless you are really experienced. For instance, don't refurb AND mod at same time. If you make a mistake, you don't know what was likely the culprit and have to sort through a lot of your steps to figure out what you did wrong. Why not just refurb, then s...

Oh, if I can do that with no sonic issues, than there should be no need for something like a Henry Eng. Matchbox. Why not keep it simple and not be redundant :lol: . Wow, so in the case of a balanced tip/ring/sleeve (stereo) jacks on the Soundcraft 600, a tip/sleeve (mono) plug would short out the r...

Darn, I meant SOUNDCRAFT... I have a Soundtracs that I am swapping out to a Soundcraft 600 :lol: Need more sleep. Anyhow, thanks Scrum! So, are there any adverse effects to tying one leg to ground to connect... say, a CD burner for mixdown? Will it change the sound at all or any other negative behav...

I just bought an old Soundcraft 600 console! I've pulled it apart to inspect, clean, and set the jumpers accordingly. So far, it looks great. A recap will be in the near future, but not yet. OK, so I need to connect my monitors and my mixdown recorder. There are outputs for "C/Room", "STU", and "Mix...

Or throw a chair....

Eh... what's that have to do with my quote above? I just called BS after people didn't see the light after 16 pages. Similar to what you just said but not caring about the reason why.