Message Board

Like many other responders, i too have found myself as engineer and performer in a small project studio setting. I find that it is best to A)be in a band with people that you get along with and consider friends, can be honest with, and share an idea of what it is you're trying to do with your band, ...

I've sometimes gated toms due to the hardware itself. For instance, a drummer i know, for some reason, his floor tom is consistently resonating even when left dormant of any stick hits. The problem is that it creates a very annoying low frequency hum on that channel, so i gate it. Just have to make ...

that was the occurence on one particular session at one moment
i did a restart and it all panned out swell

it clocks digitally you simply set the pro tools clocking source from internal to whatever unit you have set up. same goes for a octopre, octane, behringer, mackie onyx, etc etc. never had the problem happen before, and interestingly enough, when i started a new session walloah the problem was gone....

interesting...
no, i dont have a seperate word clock unit
i'm clocking the digi002r to the presnous

hey all i'm running ptle 7 on a dual 1.25ghz g4 with 2gig ram i am clocked to a digimax 96k the session is 24bit at 48k when monitoring pre-record the digimax is a thing of pure beauty, it's cleanliness is unmatched but as soon as i start to record there is quite a bit of static injected....any clue...

Hey all I have a mxl v77 and i like the sound, its much warmer than my other mics, and when paired with my bellari tube pre, it's warmer than i wish for. My question is simple.. Everyone says you need to give a tube mic about 30 minutes or so to warm up.. Well, my v77 doesn't sound any different if ...

This is a question for you guys using the shiny box 46 what kind of gain are you applying to the mic? Obviously ribbon's take a bit more gain (hopefully clean), and i read over on the gearslutz forum that the shiny box gentleman was putting around 60db to the 23s, with overs, and since the 46 is a h...

Hey guys
looking for advice on picking up a couple of condensors to use for guitar cabinets (probably along with 57s), that would also be beneficial in other applications, like room or overheads.

Between $300 used
and something like a used AT4050

thanks folks

Just curious if anyone uses AT4033 for anything other than guitar cabs...specifically room mics, and their opinions.
Thanks

That's a good idea, which i have accomplished to much titilation. However, i'd like to know what exactly is happening when i turn a depth knob, what am i doing when i crank a frequency knob, etc. I'm under the impression that understanding the reason for something occuring is helpful in learning how...

Hey all....kind of DAW question, kind of universal I've never used a digital delay, either plug-in or rack unit, and i was wondering if anyone could direct me to a good resource to explain what all the various knobs/dials do, and how to use them together to best utilize a piece of gear....I've read ...

Hey all
just curious...is anyone using a large diaphragm condensor on their kick drum?
whether it be along with a dynamic or not?
If so, what kind, why, and how are you setting it up/blending it in the mix?
Just interested in the idea is all
thanks

Hey all...could some of yall post about how you do your drum mixes in le? I'm looking for some ideas on how to do it without losing everything without the ability for analog summing. I have been starting my mixes by doing a solid drum mix with proper eq and compression. Then i buss the drum mix to t...

Hello All
Are there any 4 channel preamps out there with decent to great sound
on a budget that wont break the bank too much?