workshop: reverb

archival forum of past Tape Op Conferences

Moderator: TapeOpCraig

Locked
User avatar
Girl Toes
carpal tunnel
Posts: 1598
Joined: Thu Apr 08, 2004 2:06 pm
Location: In A Turkey Sandwich
Contact:

workshop: reverb

Post by Girl Toes » Tue Nov 01, 2005 7:18 am

The compressor workshop was fun. A reverb/spring reverb work shop could be funner. They had one at AES last month, but it was real early in the morning and I missed it.

drumsound
zen recordist
Posts: 6958
Joined: Tue Jun 01, 2004 10:30 pm
Location: Bloomington IL
Contact:

Post by drumsound » Wed Nov 02, 2005 4:18 pm

I think an effects workshop would be good.

User avatar
bantam
suffering 'studio suck'
Posts: 480
Joined: Sun Oct 12, 2003 3:55 pm
Location: boston MA
Contact:

EQ

Post by bantam » Wed Nov 09, 2005 9:02 am

i would go just to be able to build a usable EQ. It seems to be absent from
the diy/bang for the buck market.

RNEQ?

PaulWells
audio school graduate
Posts: 17
Joined: Sat Jan 01, 2005 5:46 am
Location: Sacramento, Ca.
Contact:

Post by PaulWells » Fri Nov 11, 2005 8:10 am

You mentioned that there isa lack of useable diy eqs.
Thought you might be interested in these DIY eq projects: calrec and pultec eqs.

http://gyraf.dk/gy_pd/pultec/pultec.htm

http://gyraf.dk/gy_pd/calreq/calrec.htm

Paul

User avatar
bantam
suffering 'studio suck'
Posts: 480
Joined: Sun Oct 12, 2003 3:55 pm
Location: boston MA
Contact:

Post by bantam » Fri Nov 11, 2005 8:17 am

many, many thanks.
as a great river is out of my price range this will definitaley be on deck to build.

any preference? ever built one?

PaulWells
audio school graduate
Posts: 17
Joined: Sat Jan 01, 2005 5:46 am
Location: Sacramento, Ca.
Contact:

Post by PaulWells » Fri Nov 11, 2005 8:23 am

no not yet. I've just ordered most of the parts. Still wondering if I should really go the pcb route or point to point wire them. I don't know how long it will take to make the pcbs and if it'll be more expensive than the point to point route. I have a hunch the pcbs may exhibit less interference problems than I might have with wire...but not sure.

Oppinions on this issue would be appreciated.

Paul

Locked

Who is online

Users browsing this forum: No registered users and 1 guest