mBox/Logic

brightpavilions · Post by **brightpavilions** » Mon Oct 16, 2006 8:19 pm

Just curious...

Been using ProTools LE for a couple years now and I've just grown increasingly frustrated with Digidesign as a whole. So I regularly use an original mBox and sometimes have access to an 002. Would either of these be compatible with the newest version of Logic. Running this on a dual processor G5 10.4.x

Thanks.

metaphormixer · Post by **metaphormixer** » Mon Oct 16, 2006 8:36 pm

i don't think there are any hardware limits on logic. i could be totally wrong though.

these_go211 · Post by **these_go211** » Mon Oct 16, 2006 8:36 pm

normally the digidesign stuff is very proprietary. i doubt it it would work but you should check it out. i used to use an mbox with pt le on OSX (G5 10.3). before i swiched to mackie onyx w/ firewire and tracktion i was able to download some driver, can't remember what, that allowed me to use my mbox w/ garageband. do a internet search. maybe you could get it to work.

Disasteradio · Post by **Disasteradio** » Tue Oct 17, 2006 5:38 am

mayhaps you're after this?
http://www.digidesign.com/index.cfm?nav ... emid=23192

heh, haven't used PT on a mac since like, v6, but read up a bit for a recent thread regarding using a 001 in the same fashion..

Message Board

mBox/Logic

mBox/Logic

Who is online