Convertors, pre's - Upgrading signal path choices?
Convertors, pre's - Upgrading signal path choices?
I want to upgrade my signal path as much as possible and between some cash I have and selling some gear I don't use I will have approximately $1500 - $1700.
I usually record live drums and bass di along with a scratch guitar part and overdub everything on to that. I currently have one SCA N72 pre, two EH12AY's and the pre's in my Tascam M520.
The N72 has made the biggest difference to my recordings so far so I am a believer in the importance of pre's. I have decided to definitely build two A12's to add to my SCA rack. After that I have a couple of choices for the money left over:
1.) More SCA Pre's (I get 6 channels of nice pre's)
2.) A Motu HD192 (used- I get 12 channels of nice conversion to replace the 1010lt's)
3.) An Apogee Mini Me (I get two clean pre's with a comp plus great conversion for overdubbing and a great clock for the 1010lt's.)
I am leaning towards the apogee because I really don't want to buy anything else that I will be replacing later. I feel the apogee conversion will be top notch plus I can buy it brand new and if it doesn't float my boat return it. The portability thing is pretty sweet too. But the HD192 is 12 channels of conversion for the same price...
So is it better to have a bunch of good convertors? Or two channels of great conversion along with clocking the 1010's to up their performance a bit? Or should I say screw it, live with my OK delta 1010's for now and build a rack of sca pre's?
Any advice would be greatly appreciated!!!!
Thanks,
T-rex
I usually record live drums and bass di along with a scratch guitar part and overdub everything on to that. I currently have one SCA N72 pre, two EH12AY's and the pre's in my Tascam M520.
The N72 has made the biggest difference to my recordings so far so I am a believer in the importance of pre's. I have decided to definitely build two A12's to add to my SCA rack. After that I have a couple of choices for the money left over:
1.) More SCA Pre's (I get 6 channels of nice pre's)
2.) A Motu HD192 (used- I get 12 channels of nice conversion to replace the 1010lt's)
3.) An Apogee Mini Me (I get two clean pre's with a comp plus great conversion for overdubbing and a great clock for the 1010lt's.)
I am leaning towards the apogee because I really don't want to buy anything else that I will be replacing later. I feel the apogee conversion will be top notch plus I can buy it brand new and if it doesn't float my boat return it. The portability thing is pretty sweet too. But the HD192 is 12 channels of conversion for the same price...
So is it better to have a bunch of good convertors? Or two channels of great conversion along with clocking the 1010's to up their performance a bit? Or should I say screw it, live with my OK delta 1010's for now and build a rack of sca pre's?
Any advice would be greatly appreciated!!!!
Thanks,
T-rex
[Asked whether his shades are prescription or just to look cool]
Guy: Well, I am the drummer.
Guy: Well, I am the drummer.
Hey T-Rex-
What happened- I thought you were looking at mixers? Anyway- I guess I would go the Apogee route- although I think I recall reading that the Mini-Me's converters/clock isn't the same as what's in the Big Ben/Rosetta or Ad lines, but you may want to double check that info. Do you have access to the MOTU? It sounds like the best thing would be to listen to the N72 through some other conversion to compare- Not a big difference, go the SCA route- big difference go the converter route. The MOTU would be the 3rd choice for me for the reason you mentioned. I am currently using the RME ADI-8 Pro, and I'm thinking about converters again...
I hope this is of some help, but I'm sure you already have thought everything I've said.
Good luck!
-Josh
What happened- I thought you were looking at mixers? Anyway- I guess I would go the Apogee route- although I think I recall reading that the Mini-Me's converters/clock isn't the same as what's in the Big Ben/Rosetta or Ad lines, but you may want to double check that info. Do you have access to the MOTU? It sounds like the best thing would be to listen to the N72 through some other conversion to compare- Not a big difference, go the SCA route- big difference go the converter route. The MOTU would be the 3rd choice for me for the reason you mentioned. I am currently using the RME ADI-8 Pro, and I'm thinking about converters again...
I hope this is of some help, but I'm sure you already have thought everything I've said.
Good luck!
-Josh
- Russian Recording
- re-cappin' neve
- Posts: 752
- Joined: Wed May 21, 2003 2:28 pm
- Location: Bloomington, IN
- Contact:
the MOTU HD192s are really nice, especially if you get the Black Lion Audio Mod. I have two, and had the both modded and they sound awesome. They sound almost as good as my Crane Song Spider converters (which is the master word clock for the MOTUs). The metering on the MOTUs is first rate. Remember, with the MOTUs you are also upgrading the D/A. If you are mizing out of the box, this adds up to a huge improvement (A/D and D/A upgrade).
good luck
mike
good luck
mike
Hey JDJ,
Yeah I was going to mention the mixer thing but I didn't want to make the post any longer! As much as I WANT a new console right now, I really can't afford one. So I have been really trying to look at my signal chain from mic to convertor to DAW to mixdown. I can do good work mixing ITB even though I enjoy working on a console a bit more. But what I can't do as much is capture the sounds as well as I would like.
So my current plan is to just work on the front end as much as possible and keep mixing some ITB and some OTB. After I get the the front end a little more solid I will concentrate on getting a new console.
Yeah, financially it makes so much more sense to go with the HD192. $250 for the mod isn't that bad at all, I thought it was more. I had always thought I would eventually get an HD192 and a 24i/o to use with a 32 channel console.
Yeah I was going to mention the mixer thing but I didn't want to make the post any longer! As much as I WANT a new console right now, I really can't afford one. So I have been really trying to look at my signal chain from mic to convertor to DAW to mixdown. I can do good work mixing ITB even though I enjoy working on a console a bit more. But what I can't do as much is capture the sounds as well as I would like.
So my current plan is to just work on the front end as much as possible and keep mixing some ITB and some OTB. After I get the the front end a little more solid I will concentrate on getting a new console.
Yeah, financially it makes so much more sense to go with the HD192. $250 for the mod isn't that bad at all, I thought it was more. I had always thought I would eventually get an HD192 and a 24i/o to use with a 32 channel console.
[Asked whether his shades are prescription or just to look cool]
Guy: Well, I am the drummer.
Guy: Well, I am the drummer.
- Russian Recording
- re-cappin' neve
- Posts: 752
- Joined: Wed May 21, 2003 2:28 pm
- Location: Bloomington, IN
- Contact:
or even better, 2 HD192s and a 2408 (w/black lion mod also). That's what I've been running and it's great. The 2408s REALLy open up with the mod. Like from unusable to nice (vtw, this D/A only.. i don't use the A/D on ti because of the Crane Song and HDs). The 2408 is also how i get the lighpipe from my Crane Song into my DAW, so it's also nice because you can add high end converters and use the 2408 for it's digital inputs.T-rex wrote: Yeah, financially it makes so much more sense to go with the HD192. $250 for the mod isn't that bad at all, I thought it was more. I had always thought I would eventually get an HD192 and a 24i/o to use with a 32 channel console.
mike
- Jeff White
- ghost haunting audio students
- Posts: 3263
- Joined: Sun Feb 26, 2006 6:15 pm
- Location: Philadelphia, PA
- Contact:
- Jeff White
- ghost haunting audio students
- Posts: 3263
- Joined: Sun Feb 26, 2006 6:15 pm
- Location: Philadelphia, PA
- Contact:
About 8 days roundtrip. I sent mine to them via FedEx 2-Day (NJ to Chicago).JdJ wrote:Once you guys sent your stuff out, how long was the turnaround? BTW I rescind my previous MOTU opinion after reading more on the Black Lion stuff (although I haven't heard any).
Thanks,
-J
My 828mk2 sounds amazing now.
Jeff
Good to hear the praises of BLA still floating around the board. I was contemplating re-scheduling my early December 002r mod since I've got some recording booked, but screw it - I think I'll bite the bullet for this session, rent in a few good pres and maybe a clock for my Echo Layla, then dump the session into PT when my digi gets back. Oh joy.
-dv
-dv
"lattes are stupid anyway. coffee, like leather pants, should always be black." -MoreSpaceEcho
www.dirkvanderwal.com
www.dirkvanderwal.com
Who is online
Users browsing this forum: No registered users and 123 guests