Any ideas on using a TEAC 2340r reel to reel
-
- audio school
- Posts: 3
- Joined: Sat Apr 12, 2008 1:18 pm
- Contact:
Any ideas on using a TEAC 2340r reel to reel
So I've been reading Tape Op for a few years, but I'm new to this whole forum thing. My uncle gave me a TEAC 2340r, an early 70s reel to reel 4-track, and I was wondering what sort of creative applications I could use it for.
I record everything on my g4 mac with a 002 in Pro Tools. I've got a few great mics, a sytek pre, and usually only track myself and my band. My studio is pretty straight forward.
Any ideas on how I can use this tape machine? maybe send my mixes to tape and then bring them back into pro tools? Or use it for tape delays?
Thanks.
I record everything on my g4 mac with a 002 in Pro Tools. I've got a few great mics, a sytek pre, and usually only track myself and my band. My studio is pretty straight forward.
Any ideas on how I can use this tape machine? maybe send my mixes to tape and then bring them back into pro tools? Or use it for tape delays?
Thanks.
- A.David.MacKinnon
- ears didn't survive the freeze
- Posts: 3836
- Joined: Wed May 07, 2003 5:57 am
- Location: Hamilton ON, Canada
- Contact:
- A.David.MacKinnon
- ears didn't survive the freeze
- Posts: 3836
- Joined: Wed May 07, 2003 5:57 am
- Location: Hamilton ON, Canada
- Contact:
-
- audio school
- Posts: 3
- Joined: Sat Apr 12, 2008 1:18 pm
- Contact:
Re: Any ideas on using a TEAC 2340r reel to reel
Thanks for the tips. Is there any basic upkeep that I need to do with this? The tape speed changes as it plays, so I'm guessing it's a belt. This is my first experience in the tape world, so any general maintenance info would be great.
-
- gimme a little kick & snare
- Posts: 94
- Joined: Wed Apr 09, 2008 10:09 am
- Location: New York City
- Contact:
Maybe try this:
If you're recording your whole band at once, think of the left and right channels as tracks 1 and 2 and then mix to mono. You can sub-mix a number of mics over to channel 1 or channel 2.
I've had good results doing this at band practice, with more isolation than I'd gotten previously on regular (minimal) practice tapes. Guitars on one side and drums on the other, something like that. You won't be overdubbing (not to tape, anyway) but you can EQ guitar/drums separately and adjust their levels independently. This was like a revelation to me, silly as that sounds.
This also works with a regular cassette deck.
You might find it liberating (or frustrating) to work with some limitations. I know there's a lot of possibilities with Pro Tools, and it's tempting to "fix it all later." Try getting away from the computer's visual interface and rely on your ears. Focus on mic placement and performance and having fun.
Everything gevermil said previously is good advice. If you've never used tape before, don't be afraid to hit it hard. It won't immediately crap out on you like the computer does.
As far as upkeep, there's a ton of info already on these forums. You need the right kind of alcohol and the right kind of q-tips to clean the heads, maybe a de-magnetizer, some other stuff. Don't sweat that stuff too much (yet) and just get rolling.
Please report back to us and let us know how it goes.
- Robin
If you're recording your whole band at once, think of the left and right channels as tracks 1 and 2 and then mix to mono. You can sub-mix a number of mics over to channel 1 or channel 2.
I've had good results doing this at band practice, with more isolation than I'd gotten previously on regular (minimal) practice tapes. Guitars on one side and drums on the other, something like that. You won't be overdubbing (not to tape, anyway) but you can EQ guitar/drums separately and adjust their levels independently. This was like a revelation to me, silly as that sounds.
This also works with a regular cassette deck.
You might find it liberating (or frustrating) to work with some limitations. I know there's a lot of possibilities with Pro Tools, and it's tempting to "fix it all later." Try getting away from the computer's visual interface and rely on your ears. Focus on mic placement and performance and having fun.
Everything gevermil said previously is good advice. If you've never used tape before, don't be afraid to hit it hard. It won't immediately crap out on you like the computer does.
As far as upkeep, there's a ton of info already on these forums. You need the right kind of alcohol and the right kind of q-tips to clean the heads, maybe a de-magnetizer, some other stuff. Don't sweat that stuff too much (yet) and just get rolling.
Please report back to us and let us know how it goes.
- Robin
-
- audio school
- Posts: 3
- Joined: Sat Apr 12, 2008 1:18 pm
- Contact:
Who is online
Users browsing this forum: No registered users and 195 guests