Remote Button to push Talkback on Console (Ghost) ?
- deadair
- steve albini likes it
- Posts: 320
- Joined: Wed May 07, 2003 7:54 am
- Location: Western Mass
- Contact:
Remote Button to push Talkback on Console (Ghost) ?
I have a Soundcraft Ghost board and use the built-in talkback mic and button on it. For years I've kind of hated leaning over the board to hit the button all the time, but now I've broken my ankle and positioning myself to have access to it is even trickier, more cumbersome.
I assume there must be simple gadgets that run through a cable and as you push a button on one end it physically extends and pushes a button on the other end? I think cameras used to have similar devices or maybe I'm confused about that technology? Anyways, I have tried googling this with no success, but I really don't think its too far fetched.
Has anyone rigged up something similar for any button for any use? I have moderate soldering skills if I need to construct it, but I'm certainly no electrical wizard. I also don't want to have to re-wire anything in the board itself. Sadly the board does not appear to have a talkback remote control jack.
Any insights or links to relevant ideas would be extremely appreciated!
I assume there must be simple gadgets that run through a cable and as you push a button on one end it physically extends and pushes a button on the other end? I think cameras used to have similar devices or maybe I'm confused about that technology? Anyways, I have tried googling this with no success, but I really don't think its too far fetched.
Has anyone rigged up something similar for any button for any use? I have moderate soldering skills if I need to construct it, but I'm certainly no electrical wizard. I also don't want to have to re-wire anything in the board itself. Sadly the board does not appear to have a talkback remote control jack.
Any insights or links to relevant ideas would be extremely appreciated!
- deadair
- steve albini likes it
- Posts: 320
- Joined: Wed May 07, 2003 7:54 am
- Location: Western Mass
- Contact:
After looking around I'm considering getting a Rolls MS111 to use with a random mic I don't use much. Are there other products like this that I'm unaware of (that may be cheaper)?
http://www.pro-audio-warehouse.com/ms111.html
http://www.pro-audio-warehouse.com/ms111.html
-
- mixes from purgatory
- Posts: 2750
- Joined: Thu Jul 03, 2003 11:26 pm
- Location: Denver, CO
- Contact:
There's the proco Cough Drop pedal, a very similar gadget...don't know if it's cheaper. You might be able to dig the schematic for it up and build one of your own from it...
There's also the option to use a mic with a switch on it, on an inline barrel switch. There are also some mic cables with a switch built into the female end, for adding a switch to a mic that otherwise dowsn't have one.
There's also the option to use a mic with a switch on it, on an inline barrel switch. There are also some mic cables with a switch built into the female end, for adding a switch to a mic that otherwise dowsn't have one.
- Marc Alan Goodman
- george martin
- Posts: 1399
- Joined: Tue Oct 28, 2003 7:57 pm
- Location: NYC
- Contact:
3p1t momentary switch with xlr jacks on either end. Simple on off button. Just run it to a channel.The Scum wrote:There's the proco Cough Drop pedal, a very similar gadget...don't know if it's cheaper. You might be able to dig the schematic for it up and build one of your own from it...
There's also the option to use a mic with a switch on it, on an inline barrel switch. There are also some mic cables with a switch built into the female end, for adding a switch to a mic that otherwise dowsn't have one.
Why 3P1T (3PST)? A normally-closed pushbutton SPST is easier to find and won't cause pops when pushed. Just place it across the + and - lines of the balanced cable to short them together when you want it muted.Marc Alan Goodman wrote:3p1t momentary switch with xlr jacks on either end. Simple on off button. Just run it to a channel.The Scum wrote:There's the proco Cough Drop pedal, a very similar gadget...don't know if it's cheaper. You might be able to dig the schematic for it up and build one of your own from it...
There's also the option to use a mic with a switch on it, on an inline barrel switch. There are also some mic cables with a switch built into the female end, for adding a switch to a mic that otherwise dowsn't have one.
- Marc Alan Goodman
- george martin
- Posts: 1399
- Joined: Tue Oct 28, 2003 7:57 pm
- Location: NYC
- Contact:
Who is online
Users browsing this forum: No registered users and 186 guests