828 MKII finally biting it?
828 MKII finally biting it?
My 828 MKII has been showing some noise in the cans and on the LEDS the past couple weeks. I haven't been using it since I got my MBOX 3 Mini, but tonight I noticed it introducing some static into my signal chain even when it wasn't selected as the output source. .
I've had it sine '02. Is it finally dying?
I've had it sine '02. Is it finally dying?
New music: www.sadironmusic.com
Studio site: www.sadironstudio.com
Novel website: www.sadironpress.com
Studio site: www.sadironstudio.com
Novel website: www.sadironpress.com
- Mudcloth
- steve albini likes it
- Posts: 332
- Joined: Sat Nov 01, 2003 6:30 pm
- Location: Elgin, Texas
- Contact:
I've had 828MKII since 2003-ish, maybe earlier. So far only one firewire port has gone bad (from me plugging in the cable upside down) and the mic input 2 is noisy. I muted that input so now I only have 9 analog inputs .
I ended up buying another one in excellent condition for $300, shipped. Totally worth having 16 outputs for OTB mixing. I think these are ridiculously inexpensive for what you get and worth replacing if you have to.
I ended up buying another one in excellent condition for $300, shipped. Totally worth having 16 outputs for OTB mixing. I think these are ridiculously inexpensive for what you get and worth replacing if you have to.
Matt Giles
Austin, Tx
http://www.mattguitargiles.com
http://www.myspace.com/mattguitargiles
http://www.thedrakesband.com/
How much is a stamp? I'll buy the goddamn stamp.
Austin, Tx
http://www.mattguitargiles.com
http://www.myspace.com/mattguitargiles
http://www.thedrakesband.com/
How much is a stamp? I'll buy the goddamn stamp.
-
- pushin' record
- Posts: 231
- Joined: Wed Dec 10, 2008 4:22 am
- Location: St. Charles, IL
I will say I've had mine for going on 10 years and this is the only issue I've had with it other than the LED screen going out. I never used the LED screen anyway.mscottweber wrote:An 828 mkii has been on my short list for a while now, but threads like this scare me. Even if I buy one in "excellent" condition, how long is it going to last for?
New music: www.sadironmusic.com
Studio site: www.sadironstudio.com
Novel website: www.sadironpress.com
Studio site: www.sadironstudio.com
Novel website: www.sadironpress.com
- Jeff White
- ghost haunting audio students
- Posts: 3263
- Joined: Sun Feb 26, 2006 6:15 pm
- Location: Philadelphia, PA
- Contact:
Hey Jason, isn't there some sort of hard reset that you can do to the unit? I seem to remember a way to reset it back to factory fresh mode. Also, have you upgraded software/OS without upgrading the driver? I'd like to think that this is a software issue and not a hardware issue.
Call MOTU as well. If you haven't BLA modified it I think that MOTU will repair it out of warranty for like $75, which means that they'll send you a new factory refurbished unit. Especially over the screen back light dying. They did this for me in 2006 on a unit that I bought in 2003, so it was definitely outside of warranty. It is definitely worth a shot.
Jeff
Call MOTU as well. If you haven't BLA modified it I think that MOTU will repair it out of warranty for like $75, which means that they'll send you a new factory refurbished unit. Especially over the screen back light dying. They did this for me in 2006 on a unit that I bought in 2003, so it was definitely outside of warranty. It is definitely worth a shot.
Jeff
I record, mix, and master in my Philly-based home studio, the Spacement. https://linktr.ee/ipressrecord
Dunno. I haven't really looked into it much. Since I got a new MBox Mini I haven't had use for the 828. I really only need it now for full band tracking and I almost never do that anymore. Thanks for the ideas, though.ipressrecord wrote:Hey Jason, isn't there some sort of hard reset that you can do to the unit? I seem to remember a way to reset it back to factory fresh mode. Also, have you upgraded software/OS without upgrading the driver? I'd like to think that this is a software issue and not a hardware issue.
Call MOTU as well. If you haven't BLA modified it I think that MOTU will repair it out of warranty for like $75, which means that they'll send you a new factory refurbished unit. Especially over the screen back light dying. They did this for me in 2006 on a unit that I bought in 2003, so it was definitely outside of warranty. It is definitely worth a shot.
Jeff
Hope you're good, Jeff.
New music: www.sadironmusic.com
Studio site: www.sadironstudio.com
Novel website: www.sadironpress.com
Studio site: www.sadironstudio.com
Novel website: www.sadironpress.com
- Jeff White
- ghost haunting audio students
- Posts: 3263
- Joined: Sun Feb 26, 2006 6:15 pm
- Location: Philadelphia, PA
- Contact:
I totally hear you. I can get by a lot with my Duet, but the 828mk2 has been my workhorse FOREVER. Totally love it and it's a breeze to use.
I'd just contact MOTU as a backup plan. $75 to have a functioning piece of gear is kind of worth it when it does so much.
I've been well. Been playing music again, band is doing well, just tracked an EP. Seems like you have been busy! Good for you! Be in touch, wish that we could grab a beer!
Jeff
I'd just contact MOTU as a backup plan. $75 to have a functioning piece of gear is kind of worth it when it does so much.
I've been well. Been playing music again, band is doing well, just tracked an EP. Seems like you have been busy! Good for you! Be in touch, wish that we could grab a beer!
Jeff
I record, mix, and master in my Philly-based home studio, the Spacement. https://linktr.ee/ipressrecord
Who is online
Users browsing this forum: No registered users and 11 guests