My apartment's noise rules prevent me from blastin' it when recording, mixing or mastering my projects. I have given myself over to mixing and mastering with a room/speaker emulator, Toneboosters Isone. I quite like it, actually, though as an enthusiastic amateur I can't attest to what I'm losing in the process.
My question is embarrassingly simple: when I've completed my mix or master with Isone active (I usually use the near field speaker setting, though of course always tempted to master for "cardboard box" and insist that's how the album is meant to be heard)(I also have no idea what "cardboard box" actually emulates -- your stereo in a box? You in a box? Maybe this is a more pressing question), do I render my file with Isone on, and thus getting the emulation in the final mix, or turn it off, having proved it sounds good in an emulation? Seems like mastering engineers use multiple monitors to get a sense of what's on the tape, then send out what's on the tape, rather than miking their own monitors or something. But if I like the result in the near fields, should I retain that for the final?
Perhaps it's a matter of taste, but I don't want to render files that are extra loud because I was monitoring with a quieter setting. As I said, I am an enthusiastic amateur of long standing, and have no training in recording other than starting with a four track in 1993 and moving on from there.
Thanks for your patience and replies. I bet the answer is less than three words!
Mastering with Speaker/Room emulation -- off or on?
-
- audio school
- Posts: 1
- Joined: Sun Jan 10, 2010 12:15 pm
Mastering with Speaker/Room emulation -- off or on?
-- "If fashion is your trade, then when your naked, I guess you must be unemployed." Jarvis Cocker
-
- zen recordist
- Posts: 6687
- Joined: Wed May 07, 2003 11:15 am
Re: Mastering with Speaker/Room emulation -- off or on?
i'm not familiar with this, but i can't imagine anything good coming from it. i'm not sure i understand what exactly you're doing....are you listening exclusively on headphones and using the emulator to simulate speakers?
i'd think you'd have much better luck and a much easier time just learning what things sound like on your headphones.
post mixes with it on and off and we can give you much better advice.
i'd think you'd have much better luck and a much easier time just learning what things sound like on your headphones.
post mixes with it on and off and we can give you much better advice.
I live by the mixing credo, "If it sounds good, it might be OK."
IOW, make it sound as good as you can, however you can.
That said, I should imagine the emulations use phase and EQ and possibly delays, etc., so those mixes might not translate well.
OTOH, if you are the only listener and are always on the same listening set-up, see second sentence above.
IOW, make it sound as good as you can, however you can.
That said, I should imagine the emulations use phase and EQ and possibly delays, etc., so those mixes might not translate well.
OTOH, if you are the only listener and are always on the same listening set-up, see second sentence above.
Who is online
Users browsing this forum: No registered users and 32 guests