yow..U67 inspired mics..
- Nick Sevilla
- on a wing and a prayer
- Posts: 5570
- Joined: Mon Mar 03, 2008 1:34 pm
- Location: Lake Arrowhead California USA
- Contact:
Re: yow..U67 inspired mics..
Peluso. Hands down.
Howling at the neighbors. Hoping they have more mic cables.
Re: yow..U67 inspired mics..
Having tried out the WA 251 when visiting another studio, being blown away by it and buying one for our place, when I heard about the WA 67 I jumped on it.
I've really been super happy with it.
Sounds great.
Great build/parts.
It definately punches above it's weight class.
I've really been super happy with it.
Sounds great.
Great build/parts.
It definately punches above it's weight class.
Re: yow..U67 inspired mics..
Don't know if this exists anywhere yet but I'd love to hear a shootout between the WA-67 and the Advanced Audio CM67. They're about the same price range and the people that love them seem to rave about them.
Re: yow..U67 inspired mics..
VM1 seemed like a 67 on steroids to me.
-
- alignin' 24-trk
- Posts: 67
- Joined: Thu Nov 04, 2021 9:24 pm
Re: yow..U67 inspired mics..
Bringing this back up from last year.
They are currently out of stock but I recently built a kit from Microphone Parts called a T-67. I have no affiliation with Microphone Parts or Roswell Microphones. I've built 3 of their kits, two of them were Mod kits for upgrading existing cheap mics. I won the first kit in a contest on YouTube and had to go find a beater MXL 990 to put it in. That one has the RK-47 capsule in it now and and a FET / Transformer circuit. It does not sound like an MXL microphone at all anymore, it's really good.
When it comes back, it should be on this page with the other T kits. https://microphone-parts.com/collection ... phone-kits
The T stands for Transformer and they have a new Platinum model transformer that I spec'ed in my order.
This is a FET circuit, it was not difficult to build if you have the right tools and some soldering experience you can do it in a couple of sittings.
It's a great sounding microphone, I am grateful to be able to get a microphone of this quality for under $500 and some elbow grease.
There are easily accessed internal switches for Cardioid/Omni and a Pad. They'll build it for you for a few more buck.
They are currently out of stock but I recently built a kit from Microphone Parts called a T-67. I have no affiliation with Microphone Parts or Roswell Microphones. I've built 3 of their kits, two of them were Mod kits for upgrading existing cheap mics. I won the first kit in a contest on YouTube and had to go find a beater MXL 990 to put it in. That one has the RK-47 capsule in it now and and a FET / Transformer circuit. It does not sound like an MXL microphone at all anymore, it's really good.
When it comes back, it should be on this page with the other T kits. https://microphone-parts.com/collection ... phone-kits
The T stands for Transformer and they have a new Platinum model transformer that I spec'ed in my order.
This is a FET circuit, it was not difficult to build if you have the right tools and some soldering experience you can do it in a couple of sittings.
It's a great sounding microphone, I am grateful to be able to get a microphone of this quality for under $500 and some elbow grease.
There are easily accessed internal switches for Cardioid/Omni and a Pad. They'll build it for you for a few more buck.
- digitaldrummer
- cryogenically thawing
- Posts: 3516
- Joined: Wed Nov 23, 2005 9:51 pm
- Location: Austin, Texas
- Contact:
Re: yow..U67 inspired mics..
I suppose in the interest of completeness, I'll also mention the Slate VMS ML-1. It's a LDC FET Condenser but it has a modeling plugin. The mic by itself sounds pretty good actually. Then when you insert the plugin, you can try out all sorts of different models, and of course a 67 is in there. I got the mic when it first came out and got a bundle with all of the mic models that exist so far (base, Blackbird and Classic Tubes 3). I don't use the VMS preamp, but I have a flat and neutral pre I can use. or sometimes, I just go for a nice Neve clone or whatever. I don't expect the mics to really sound exactly like the originals, nor do I have the originals to compare. What I do is just cycle through the models until one pops for me.
The downside, is that with my Apollo rig, there is really too much latency to monitor through the DAW, so I can't use the plugins during recording. The Townsend L22 looks like a better fit for that (since you can insert the plugin in the UAD console), and I considered trying one, but I've got enough "real" mics I like that its off my list and the Slate mic may hit the chopping block soon too. I am keeping the Slate ML-2 mics though (I have a pair). I find them useful from time to time (strange thing is that they also have a model of a 67...).
there's this one too... https://stamaudio.com/category/sa67/ (never tried one though)
The downside, is that with my Apollo rig, there is really too much latency to monitor through the DAW, so I can't use the plugins during recording. The Townsend L22 looks like a better fit for that (since you can insert the plugin in the UAD console), and I considered trying one, but I've got enough "real" mics I like that its off my list and the Slate mic may hit the chopping block soon too. I am keeping the Slate ML-2 mics though (I have a pair). I find them useful from time to time (strange thing is that they also have a model of a 67...).
there's this one too... https://stamaudio.com/category/sa67/ (never tried one though)
-
- alignin' 24-trk
- Posts: 67
- Joined: Thu Nov 04, 2021 9:24 pm
Re: yow..U67 inspired mics..
Nice, I've considered both the Slate and the Townshend modeling mic options. I'm a small home studio guy recording my own songs and an occasional outside project so either could cover lots of bases.digitaldrummer wrote: ↑Thu Jan 20, 2022 6:20 amI suppose in the interest of completeness, I'll also mention the Slate VMS ML-1. It's a LDC FET Condenser but it has a modeling plugin. The mic by itself sounds pretty good actually. Then when you insert the plugin, you can try out all sorts of different models, and of course a 67 is in there. I got the mic when it first came out and got a bundle with all of the mic models that exist so far (base, Blackbird and Classic Tubes 3). I don't use the VMS preamp, but I have a flat and neutral pre I can use. or sometimes, I just go for a nice Neve clone or whatever. I don't expect the mics to really sound exactly like the originals, nor do I have the originals to compare. What I do is just cycle through the models until one pops for me.
The downside, is that with my Apollo rig, there is really too much latency to monitor through the DAW, so I can't use the plugins during recording. The Townsend L22 looks like a better fit for that (since you can insert the plugin in the UAD console), and I considered trying one, but I've got enough "real" mics I like that its off my list and the Slate mic may hit the chopping block soon too. I am keeping the Slate ML-2 mics though (I have a pair). I find them useful from time to time (strange thing is that they also have a model of a 67...).
there's this one too... https://stamaudio.com/category/sa67/ (never tried one though)
Then from out of the blue, I won the mic mod kit from Microphone Parts and built that. I really enjoyed doing that, when the T-67 was announced, I got one. I have no idea what a real U67 sounds like and while I'd love to try one it doesn't matter - this is an excellent mic and a real bargain if you can solder and screw things together. Considering the prices for assembled mics - justifiably quite a bit more expensive - I just wanted to pass this along as an option since a fair number of studio rats have spent some time with a soldering iron already.
Who is online
Users browsing this forum: No registered users and 54 guests